Bottom rubber mount seal for sliding window | FerrariChat
Buy

Bottom rubber mount seal for sliding window

Discussion in '206/246' started by pshoejberg, Oct 27, 2013.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. pshoejberg

    pshoejberg Formula 3
    Silver Subscribed

    Dec 22, 2007
    1,844
    Denmark
    Full Name:
    Peter H
    #1 pshoejberg, Oct 27, 2013
    Last edited by a moderator: Sep 7, 2017
    Any of you experts that knows where I can get the rubber mount seal for the side window fixation bar. I cannot see it presented on the Cicognani homepage. The seal is U-formed with outer dimensions of approximately 7 x 9 mm and the window glass is 5 mm thick.

    Thanks in advance...Peter
    Image Unavailable, Please Login
     
  2. GermanDino

    GermanDino F1 Rookie

    Aug 14, 2007
    3,488
    Germany
    Full Name:
    Matthias
    #2 GermanDino, Oct 27, 2013
    Last edited by a moderator: Sep 7, 2017
    Hello Peter,

    Cicognani has this very close rubber mount seal for the side window fixation bar with your dimentions. I bought it this weekend in Padua.

    Regards Matthias

    PS: They have much much more than shown on the homepage....
    Image Unavailable, Please Login
     
  3. pshoejberg

    pshoejberg Formula 3
    Silver Subscribed

    Dec 22, 2007
    1,844
    Denmark
    Full Name:
    Peter H
    #3 pshoejberg, Oct 27, 2013
     
  4. GermanDino

    GermanDino F1 Rookie

    Aug 14, 2007
    3,488
    Germany
    Full Name:
    Matthias
    #4 GermanDino, Oct 27, 2013
     
  5. tx246

    tx246 F1 Veteran
    Owner Rossa Subscribed

    Nov 4, 2003
    6,671
    Texas
    Full Name:
    Shawn
    #5 tx246, Oct 27, 2013
    Do they Dino specific stuff not on their site?
     
  6. dgt

    dgt Formula 3
    Owner Silver Subscribed

    Jan 14, 2011
    1,292
    Northeast, USA & Oz
    Full Name:
    Andrew
    #6 dgt, Oct 29, 2013
    Last edited by a moderator: Sep 7, 2017
    Peter,
    I had no luck finding this seal for some time and I sent Cicognani a sample to see if they had it or could make it.
    I talked to Michela last week in Padua and they have found it, their code is "FIL 1257", see drawing below. It's not on their web pages.
    I think it's a little different than the one Matthias quoted (actually, Matthias kindly bought me a length of this one also.)

    I'm ordering a length of FIL 1257 and will update when I've seen how well it fits.
    Andrew
    Image Unavailable, Please Login
     
  7. GermanDino

    GermanDino F1 Rookie

    Aug 14, 2007
    3,488
    Germany
    Full Name:
    Matthias
    #7 GermanDino, Oct 29, 2013
    I`m looking forward to your update, thanks Andrew
     
  8. pshoejberg

    pshoejberg Formula 3
    Silver Subscribed

    Dec 22, 2007
    1,844
    Denmark
    Full Name:
    Peter H
    #8 pshoejberg, Oct 29, 2013
    Thanks Andrew,

    Your input is highly apreciated. It looks like a very close match based on the small "Italien" sketch. I will put mý order on standby until further notice.

    Regards

    Peter
     
  9. swift53

    swift53 F1 Veteran
    Rossa Subscribed

    Nov 17, 2007
    8,371
    E.S.
    Full Name:
    Alberto
    #9 swift53, Oct 29, 2013
    After having to remake the channels due to the horrid corrosion, the consensus was to glue them in, thus shedding all possibility of water stagnating there.

    Very inexpensive black glass silicone, and it sticks quite solidly.

    Regards, Alberto
     
  10. dignini

    dignini Formula 3

    Aug 21, 2005
    1,348
    NJ
    Full Name:
    Luigi Marazzi
    #10 dignini, Oct 30, 2013
    Last edited by a moderator: Sep 7, 2017
  11. pshoejberg

    pshoejberg Formula 3
    Silver Subscribed

    Dec 22, 2007
    1,844
    Denmark
    Full Name:
    Peter H
    #11 pshoejberg, Oct 30, 2013
    No..that's the window sliding channel..

    Peter
     
  12. dgt

    dgt Formula 3
    Owner Silver Subscribed

    Jan 14, 2011
    1,292
    Northeast, USA & Oz
    Full Name:
    Andrew
    #12 dgt, Nov 5, 2013
    Last edited by a moderator: Sep 7, 2017
    Cicognani FIL 1257 is the correct profile and 1m/car is enough, see photo (original on right).
    Now I expect they'll be flooded with enquiries... I should warn them to ramp production. :)
    Image Unavailable, Please Login
     
  13. pshoejberg

    pshoejberg Formula 3
    Silver Subscribed

    Dec 22, 2007
    1,844
    Denmark
    Full Name:
    Peter H
    #13 pshoejberg, Nov 5, 2013
    Thanks for the confirmation Andrew...I doubt that there will be a flood of guys pulling their windows to access this rubber thingy, it's quite a delicate job....
     
  14. GermanDino

    GermanDino F1 Rookie

    Aug 14, 2007
    3,488
    Germany
    Full Name:
    Matthias
    #14 GermanDino, Nov 5, 2013
    thanks
    :)
     

Share This Page