anyone familiar with these calipers? I am trying the find out the maker on my BB, they were custom made possibly by Brembo they are not OE. Image Unavailable, Please Login Image Unavailable, Please Login
Between Eric and Myself, we can probably figure it out but I need a better look at what you have. Either rotate the wheel or remove it to get a better shot. Martin
I have no clue what they are or how they work. Are you having problems with them? Can you post a better picture, with the wheel off? Martin
Hi I recently had a small engine fire and am dealing with getting some replacement wiring and safety wiring the carbs etc., I have not had the wheel nuts off the car yet, I tried with the factory wrench to no success so I need to get a big socket with a cheeter bar to take them off, its on my list to buy after I get the wiring fixed so I can get a better pic of them. Concerning how they work the pads must be a metallic racing type so they squeal alot and need to be driven hard to make them work well, so for the street I don't like them and would like to replace them, the brakes do work excellent though the limitations are clearly the P6 tires that are on the car and I am going to replace them with something more meaty such as a 275/60/15 on the rear and modern so I am sure it will make a major difference then also. I would like to find out what they area also, a PO spent some big bux supposedly on the brakes having them custom modded and made, I don't know the history of them or what was done, the brakes do look good drilled on the car though and adds a nice touch, this was done when drilling was the rage and only choice.
