Brake Compensator brake pipe thread size | FerrariChat

Brake Compensator brake pipe thread size

Discussion in '206/246' started by TonyL, May 29, 2018.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. TonyL

    TonyL F1 Rookie

    Joined:
    Sep 27, 2007
    Messages:
    4,202
    Location:
    Norfolk - UK
    Full Name:
    Tony
    Does anyone know what the brake pipe thread is on the top of the 246 series 3 (E) brake compensator, it seems to be a coarser thread than the standard fitting and I don't want to take it out just yet without a replacement to hand.
     
    TonyL, May 29, 2018
    #1
  2. dino clay

    dino clay Karting

    Joined:
    Oct 31, 2007
    Messages:
    185
    Location:
    san mateo, cal
    Full Name:
    clay cavanaugh
    Takr it out. You have to bleed the brake system anyway. Go to Home Depot with the compensator and they have a board with all metric and usthreads. Or, buy a thread ptitch checkeer todetermine the pitch. I am almost sure that it eill be usa
     
    dino clay, May 29, 2018
    #2
  3. TonyL

    TonyL F1 Rookie

    Joined:
    Sep 27, 2007
    Messages:
    4,202
    Location:
    Norfolk - UK
    Full Name:
    Tony
    M10 x 1.25 for future reference.
     
    TonyL, May 30, 2018
    #3

Share This Page