Brake judder after wheel change? | FerrariChat
Buy

Brake judder after wheel change?

Discussion in '360/430' started by edburger, Sep 7, 2005.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. edburger

    edburger Karting

    Jun 23, 2005
    141
    Oakland, Dunsmuir,CA
    Full Name:
    Eric D. Burger
    #1 edburger, Sep 7, 2005
    A friend w/ a 99 355 just changed tires, same rims. he now seems to have "brake judder". He called back and ask what torque, they said 98lb., 17 or 18 lb. more than it should've been ( I can't rember exactly the #)...
    he torqued it to spec. but still has it... are these clearances so tight that a bend or mis-align of mounting could do this? the wheels just came off and back on...has any one else had this problem???
     
  2. edburger

    edburger Karting

    Jun 23, 2005
    141
    Oakland, Dunsmuir,CA
    Full Name:
    Eric D. Burger
    #2 edburger, Sep 7, 2005
    Anyone?... Anyone?... Bueller?... Bueller?
     
  3. Koby

    Koby Formula 3

    Dec 14, 2003
    2,307
    The Borough, NJ
    Full Name:
    Jason Kobies
    #3 Koby, Sep 8, 2005
    sounds like it could be wheel balance, do you get a vibration in the steering at certain speeds?

    Ideally the tires should be positioned on the wheel so its heavy point is counter balanced against the wheel's heaviest point, this minimizes the need for sticker weights
     
  4. edburger

    edburger Karting

    Jun 23, 2005
    141
    Oakland, Dunsmuir,CA
    Full Name:
    Eric D. Burger
    #4 edburger, Sep 11, 2005
    no ,he described it as "the last 30 feet or so" of stopping...
     

Share This Page