Brake light mods

Discussion in 'California/Portofino/Roma' started by mrbon007, Aug 17, 2017.

  1. SB27

    SB27 Karting

    Dec 2, 2015
    Thanks, Todd. Amazing write up.

    Anyone know if this process is the same for a California T? Thank you.
  2. To remove this ad click here.

  3. thomastrain

    thomastrain Rookie

    Oct 30, 2019
    Full Name:
    Steve CI
    one would think there would be a way to put a jumper at the fuse box to connect the trunk circular lights to operate as a brake lights.
    Seth Gillespie likes this.
  4. ToddMick

    ToddMick Karting

    Sep 30, 2019
    Las Vegas
    Full Name:
    Todd M
    No problem and glad it can help so many others. I’d assume it must be similar. Try pulling the panels off and looking - that should only take maybe an hour.

    Sent from my iPhone using mobile app
  5. rob.kruiswijk

    rob.kruiswijk Formula Junior

    Jun 15, 2014
    Full Name:
    bus you are still compliant with three brake lights when your trunk is not open. Which is mandatory for safety.
  6. res1afbe

    res1afbe Rookie

    Sep 6, 2011
    I followed the directions with success. Pretty much everything you mentioned, Todd, was true - especially the part about the tight quarters in the flexible rubber harness. My Cali is a ‘10 so I decided to add a backup camera at the same time and THAT wire set was impossible to get through the rubber so I did a bit of a piggyback on the backside of the factory route which works just fine.
    Image Unavailable, Please Login Image Unavailable, Please Login
    Bill Phillips likes this.
  7. To remove this ad click here.

  8. Bill Phillips

    Bill Phillips Karting
    Silver Subscribed

    Nov 4, 2019
    New Orleans
    Full Name:
    That's a really nice looking job.
    res1afbe likes this.
  9. whatheheck

    whatheheck F1 Rookie
    Silver Subscribed Owner

    Mar 27, 2006
    Seattle, Wa
    Full Name:
    Dan L.

Share This Page