broken 360 rear engine glass

I just need the pigtail. Anyone have a broken glass?

 

Hunh?

Buy another piece of glass, scrape off all the old glass and glue on a new panel with 3m glass adhesive. Mine life’s on the passenger side then glued it back…

 

Is this the same as having a low turn signal fluid level?
Image Unavailable, Please Login

 

OK, I need the pigtail for the rear defroster on a 360 modena. I am hoping that someone cut the pigtail off the glass before throwing it away

 

Ahhhh... is it completely pulled off the glass? Look like located on passenger side of glass. As in just metal that remains on the glass? Or is there a clipped pigtail? If it's clipped.. I'd solder on another pigtail based on connector from a car electrical connector kit. If pulled free.. hmmm... can have pic of it up here?

 

Since the wire and connecter got burned I would like to replace it where it meets the glass. Just hoping someone would have a busted rear window, but seems that they all get tossed with the pigtail.

 

I had that on my 928, pigtail pulled off the rear glass when I was cleaning the inside of the rear window one day. Not fun. It's basically a bent piece of conductive metal. Perhaps solder on a new pigtail out of a straight piece of electrical connector? One of the spade type is what I'm thinking. Might have to remove the rear hatch to do it properly. How is the seal and adhesive around the edge of the window? Is it intact or melted? Would it make sense to just remove the rear window? Also, any idea if the glass repair shops have a solution?