Bucket Seats how to install? | FerrariChat

Bucket Seats how to install?

Discussion in '348/355' started by skierlawyer, Aug 21, 2023.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. skierlawyer

    skierlawyer Formula Junior

    Sep 12, 2010
    385
    Golden, CO
    Full Name:
    Brian
    I want to install either Sparco bucket seats or OMP into my F355 Berlinetta. Does anyone have advice for a mounting bracket? The holes for the factory seats are unusual in that the front bolts screw in parallel to the floor and the rear bolts are perpendicular to the floor.
    Thanks for any help here.
     
  2. skierlawyer

    skierlawyer Formula Junior

    Sep 12, 2010
    385
    Golden, CO
    Full Name:
    Brian
    Thank you!


    Sent from my iPhone using Tapatalk
     
  3. fboutlaw

    fboutlaw Formula Junior

    Dec 3, 2014
    260
    Woodside, CA
    You may not need the sparco base, but that looks like it'd make life a lot easier. I bolted my brackets directly to the stock sliders. It required drilling 2 new holes to match up bolt locations. This was for a narrow lotus exige seat.
     
  4. yelcab

    yelcab F1 World Champ
    Consultant

    Nov 29, 2001
    13,547
    San Carlos, CA
    Full Name:
    Mitchell Le
    custom brackets to the car, OMP slider to the custom bracket, OMP seat to the slider.
     
  5. OCKlasse

    OCKlasse Formula Junior
    Rossa Subscribed

    Oct 5, 2006
    709
    Newport Beach, CA
    Full Name:
    Brandon K
    I had BBI develop some F355 Recaro (I believe same as Sparco) side mounts that bolt to the factory sliders if you're interested.

    https://bbiautosport.com/
     
  6. 348Jeff

    348Jeff Formula 3

    Oct 25, 2011
    1,531
    UK
    Full Name:
    Jeff

Share This Page