Bushing refurbishment and change of Transmission Fluid | FerrariChat

Bushing refurbishment and change of Transmission Fluid

Discussion in '206/246' started by npwmd2, Sep 10, 2023.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. npwmd2

    npwmd2 Formula Junior

    Mar 31, 2015
    254
    Hudson Valley
    Full Name:
    Neal
    A personal note from an original Dino owner.
    Never did I change out any of the bushings in Dino 04124. This summer, I finally did with a (Superformance) kit and shock bushings as well. The car handles like a new car. Can't recommend it enough if your Dino has original bushings.
    Another thing I changed was the transmission fluid from "SILTEX" to "REDLINE" 75W90 NS. No more grinding in second or in downshifting, wonderful.
    Thats it.
     
    TonyL likes this.
  2. TonyL

    TonyL F1 Rookie

    Sep 27, 2007
    4,202
    Norfolk - UK
    Full Name:
    Tony
    I would recommend 4 wheel laser alignment afterwards, it will handle even better if set up correctly
    Tony
     
  3. npwmd2

    npwmd2 Formula Junior

    Mar 31, 2015
    254
    Hudson Valley
    Full Name:
    Neal
    Yeah, Thanks for the comments.
    I also, put new XWX tires on and balanced them all by the dealer here in NY. Laser balanced maybe? Car drives brand new. Can't say enough about periodic maintenance!
     
  4. TonyL

    TonyL F1 Rookie

    Sep 27, 2007
    4,202
    Norfolk - UK
    Full Name:
    Tony
    I was referring to laser alignment Neal, after my rebuild the settings were way out when checked. You need to check Camber, Caster and toe including steer ahead and thrust angle.

    The steer ahead setting was the worst and it drove like a go kart once set to 0 deg.

    Nothing to lose except a few hundred dollars, everything to gain on those new boots!
     
  5. npwmd2

    npwmd2 Formula Junior

    Mar 31, 2015
    254
    Hudson Valley
    Full Name:
    Neal
    Yeah, Tony the Dealer Wide World of Cars did adjust all the alignment settings, I imagine they have the latest laser equipment to do so.
    Thanks a lot for your input.
     

Share This Page