California T Battery replacement

Thought I would add to the community. I read various threads for battery replacement and printed sever of our members instructions. Turns out, for the T model, the procedure is much simpler.

Remove cover between air inlet tubes. These are 4 plastic screws which can be undone by hand.
Once removed the batter is right there.
Note, on the T the inlet tubes are left in place and not touched.
Remove the negative battery clamp
Remove two screws holding the red breaker on the positive side.
Remove large bolt holding battery strap at the back of the battery and lay strap towards front of car
Remove positive terminal and lift and place all the attached components to the side.
Have a friend grab one battery handle and you the other and lift up and out of the thermal blanket.

Repeat for install. I did follow the instructions for resetting the doors, windows etc in previous threads. no issues. It was that easy and anyone with basic skills can do this at home. I purchased the interstate battery others have recommended. https://www.amazon.com/dp/B0BH8D85S7/ref=pe_386300_440135490_TE_simp_item_image?th=1

 

I haven't had any experience with them yet.