California wheels also fit 355 360 and 430 | FerrariChat

California wheels also fit 355 360 and 430

Discussion in '348/355' started by Skipper, Oct 7, 2009.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. Skipper

    Skipper Formula Junior

    Sep 24, 2006
    451
    Full Name:
    Frank Drebin
    #1 Skipper, Oct 7, 2009
    Last edited by a moderator: Sep 7, 2017
  2. James-NZ

    James-NZ F1 Veteran

    Jun 26, 2007
    5,822
    Hamilton, NewZealand
    Full Name:
    James
    If they are the correct offset for 360/430 the offset will be to wide for a 355.

    You might want to check this out.

    Just saying....:)
     
  3. 355

    355 F1 Rookie
    BANNED

    Jan 4, 2005
    3,643
    Toronto
    Full Name:
    Frank
    Yes you are correct. I have seen wide offset aftermarket wheels on 355s in the past and it is damn awful looking.
     
  4. Skipper

    Skipper Formula Junior

    Sep 24, 2006
    451
    Full Name:
    Frank Drebin
    #4 Skipper, Oct 8, 2009
    Last edited by a moderator: Sep 7, 2017
    OEM 355 wheels are 7.5Jx18, offset 46.15 mm and 10Jx18, offset 77.9 mm.

    offset match on the front and within an inch on the rears. Many 355 owner but Hill Engineering 1/2"-3/4 spacers on the rear to begin with - as the rear wheels are too deep in the wheel well they desire the coke bottle rear end look

    check it out - this car with 3/4 inch rear spacers

    you would go with

    front tires 225/35/19
    rear tires 265/35/19

    OEM F 225/40 18 R 265/40 18

    (225 x 0.40 x 2) ÷ 25.4 = 7.09" + 18" = 25.09" F
    (265 x 0.40 x 2) ÷ 25.4 = 8.35" + 18" = 26.35" R

    (225 x 0.35 x 2) ÷ 25.4 = 6.20" + 19" = 25.20" F
    (265 x 0.35 x 2) ÷ 25.4 = 7.30" + 19" = 26.30" R
    Image Unavailable, Please Login
    Image Unavailable, Please Login
    Image Unavailable, Please Login
     
  5. James-NZ

    James-NZ F1 Veteran

    Jun 26, 2007
    5,822
    Hamilton, NewZealand
    Full Name:
    James
    #5 James-NZ, Oct 8, 2009
    Last edited: Oct 8, 2009
    I know 19" can fit, I am using them on my car now. This is not a concern.

    What you are saying is the Cali rims will fit 355, 360 and 430. If the rims are the correct offset for the 360/430 then they are too wide for the 355.

    If they are the correct offset for the 355 then they will need spacers to work on 360/430.



    An inch is a huge difference in wheel offset.
     
  6. 2012 Andrew California

    Jun 3, 2023
    4
    San Diego
    Full Name:
    Andrew Higgins
    Will 355 wheels fit on a 2012 California?
     
  7. ChoonHound

    ChoonHound Formula 3

    May 13, 2022
    2,223
    Saint Michaels, MD
    Full Name:
    Lucas
    You can make almost anything fit. That’s not saying much.

    For a while my Esprit had BBS wheels intended for a mustang.


    Sent from my iPhone using FerrariChat
     
  8. Ferrarium

    Ferrarium F1 Veteran
    Sponsor Rossa Subscribed

    Jul 28, 2018
    5,728
    Central NJ
    Full Name:
    Eric
    Well... the bolt pattern is right if that's the definition of fit.

    The rears will be 17mm out farther than OEM 355 wheels, the tires will be outside the rear fender like a jacked 67 Camaro on air shocks. Fact.

    Some people either
    a) know it and love it
    b) never noticed and are probably not car guys anyhow.
     

Share This Page