Cam Seal Leak - 1994 348 Spider | FerrariChat
Buy

Cam Seal Leak - 1994 348 Spider

Discussion in '348/355' started by Derekevan13, Nov 21, 2018.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. Derekevan13

    Derekevan13 Karting

    Jun 9, 2017
    62
    #1 Derekevan13, Nov 21, 2018
  2. tbakowsky

    tbakowsky F1 World Champ
    Consultant Professional Ferrari Technician

    Sep 18, 2002
    19,958
    The Cold North
    Full Name:
    Tom
    #2 tbakowsky, Nov 21, 2018
    Looks like the leak is coming from the joint between the valve cover gasket and the end plate gasket.

    Pop the end plate off, remove the gasket. Sung down the cam cover about about 8nm of torque. Check to see that the cam cover gasket is flush with the end of the head and cover. If it is shallow, use some RTV silicone to fill the gap, install a new end plate gasket and refit the end plate with a surface smear of RTV around the entire surface of the gasket. That should take care of the leak.
     
    Derekevan13 likes this.
  3. Derekevan13

    Derekevan13 Karting

    Jun 9, 2017
    62
    #3 Derekevan13, Nov 22, 2018
    Seems like something I can tackle in the garage without a lift as there is plenty of clearance from above. Thanks!


    Sent from my iPhone using FerrariChat.com mobile app
     

Share This Page