Camshaft and TDC. F430 | FerrariChat

Camshaft and TDC. F430

Discussion in '360/430' started by MathiasF40, Oct 16, 2022.

Tags:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. MathiasF40

    MathiasF40 Rookie

    Oct 31, 2016
    5
    Sweden
    #1 MathiasF40, Oct 16, 2022
    Anyone got the instructions how to adjust the camshaft, TDC, and valve open lenght.

    I searched and found the workshop manual but its missing the timing section.

    Best Regards,
    Mathias
     
  2. mike32

    mike32 F1 Veteran

    May 13, 2016
    5,835
    Isle of man- uk
    #2 mike32, Oct 17, 2022
    Why do you want to adjust this ? Remember the camshafts have variable timing and is this working
     
  3. MathiasF40

    MathiasF40 Rookie

    Oct 31, 2016
    5
    Sweden
    #3 MathiasF40, Oct 17, 2022
    Need it since i have a bastard engine.

    Maserati Engine with custom rods and F430 camshaft and crankshaft. Custom intake and twin turbo.
    Image Unavailable, Please Login
     
  4. mike32

    mike32 F1 Veteran

    May 13, 2016
    5,835
    Isle of man- uk
    #4 mike32, Oct 17, 2022
    Would be great in a lawnmower
     
  5. mwstewart

    mwstewart F1 Rookie

    Feb 5, 2014
    2,641
    England
    Full Name:
    Mark
    #5 mwstewart, Oct 17, 2022
    Nice project. Please keep us updated. I have an engine build planned for my F430.
     
    MathiasF40 likes this.
  6. RedNeck

    RedNeck F1 Veteran
    Silver Subscribed

    Jul 8, 2016
    9,978
    The CSA
    Full Name:
    Me
    #6 RedNeck, Oct 17, 2022
    So has this engine ran before? What exactly are you trying to do? Aldous has a good writeup on degreeing the cams on a 360 engine, might point you in the right direction, obviously the 360 uses belts..
     
  7. MathiasF40

    MathiasF40 Rookie

    Oct 31, 2016
    5
    Sweden
    #7 MathiasF40, Oct 19, 2022
    This engine has not run as is before, only as a Maserati Quattroporte engine.

    The combination of parts has not been started yet.
     

Share This Page