Cant get bell housing off | FerrariChat
Buy

Cant get bell housing off

Discussion in '308/328' started by masonfamliy04, Aug 31, 2008.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. masonfamliy04

    masonfamliy04 Karting

    Nov 29, 2004
    221
    Brooksville Florida
    Full Name:
    Bill, Amanda, Tyler
    #1 masonfamliy04, Aug 31, 2008
    I need your help guys, I can't seem to get the bell-housing with the knock down gears off. It will slide almost all the way off and then just stops!! At this point it is past all the studs? What have I for got to do?
     
  2. fastradio

    fastradio F1 Rookie
    BANNED Professional Ferrari Technician

    Apr 26, 2006
    3,664
    New England
    Full Name:
    David Feinberg
    #2 fastradio, Aug 31, 2008
  3. masonfamliy04

    masonfamliy04 Karting

    Nov 29, 2004
    221
    Brooksville Florida
    Full Name:
    Bill, Amanda, Tyler
    #3 masonfamliy04, Aug 31, 2008
    Thank you so much David!!
     
  4. fastradio

    fastradio F1 Rookie
    BANNED Professional Ferrari Technician

    Apr 26, 2006
    3,664
    New England
    Full Name:
    David Feinberg
    #4 fastradio, Aug 31, 2008
    Seems that a few years ago, whilst doing one of these cars, I forgot about that "little hidden treasure"....

    Best of luck,
    David
     
  5. rizzo308

    rizzo308 F1 Rookie
    Silver Subscribed

    Sep 12, 2004
    2,780
    Perth, Australia
    Full Name:
    riggio
    #5 rizzo308, Aug 31, 2008
    Last edited by a moderator: Sep 7, 2017
    your going ok ..... theres 2 o rings that seat in between b/housing and engine the one that seals around the g/box shaft will be gammed around the shaft snap ring that sits past the splines on the shaft push the b/housing bak flash light down there you may be able to see the little bleeder...... bit of gentle force will get you past it
    Image Unavailable, Please Login
     

Share This Page