Ferrari 355 5.2 spec Hi sorry if this has been asked before but the diagram for piping up the valve is rubbish. I have two rubber pipes coming off the old solenoid valve on the left (the one with the black connector ) and looking at the diagram it says to connect the pipe with the t piece to one of the new solenoid connectors but what happens with the other one that goes all the way back to the intake manifold ?. So pictures would help !
Hope this helps. http://www.ferrarichat.com/forum/348-355-sponsored-bradan/279806-exhaust-bypass-valve-capristo-355-a.html
Thanks. So if I get it correctly the t piece pipe goes on the bottom of the new solenoid and the other rubber pipe off the old solenoid goes to the other connection on the new solenoid. My confusion is from the photo on the capristo website where the photo shows the new tube attached to the solenoid and the actuator
