360 Carbon brake pads?

I asked Aldous about this after watching the video and he said it was a pad made just for him by a European company. Didn't say which company or anything specific about compounds. He quoted me 160GBP per axle.

 

no, I just wanted to know the information, I'm still on stock Brembo pads as I'm not due for a change yet

 

Sounds like Pagid. They do pads for Mov'It to their proprietary specs.

 

but Pagids usually squeal unbearably on metal discs at least

 

Richard- What, you think all Pagid pads are the same? They have literally thousands of compounds for dozens of different types of cars. I have Pagids on my ceramic brakes and no squeal, no dust.

 

well on my previous Porsches with STEEL METAL disc brakes over the years I have tried most Pagid versions and they all squealed like hell, no doubt for CARBON CERAMIC discs its different as in your case.

However the video refers to STEEL METAL disc brakes ....

 

You might be as well to look up EBC brakes in the UK as they do about 5 grades of pads, made in the uk as well

 

So Taz did you not watch the video before you asked me that question ? as I would like to have a VERY detailed explanation for your misplaced comments, you attack me at every opportunity where are the moderators please ????

 

as I will be reporting you now, this has gone on tooooo long

 

reported

 

and meanwhile Taz pls explain yourself
So Taz did you not watch the video before you asked me that question ? as I would like to have a VERY detailed explanation for your misplaced comments, you attack me at every opportunity where are the moderators please ????

 

RichardCH. don't see the issue here, but if Taz bothers you, put him on ignore.

D

 

Not seeing it either, I have responded to your pm's.

 

Richard- I ran Pagid racing pads for several years that were on the 575M Fiorano Handling Package and those had been properly bedded and did not squeal, even though the FHP tech bulletin says they may squeal.

You have a tendency to make overarching statements that have little basis in fact. Pagid pads are on millions of cars with steel rotors and obviously not all of them squeal. The fact you had some that squealed does not mean they all do.

What, you think the moderators should get involved for telling you the obvious fact not all Pagid brake pads squeal?