carbon fiber parts for ferrari 360 spider | FerrariChat
Buy

carbon fiber parts for ferrari 360 spider

Discussion in '360/430' started by star55, Aug 26, 2011.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. star55

    star55 Karting

    Jun 24, 2011
    141
    #1 star55, Aug 26, 2011
    hey guys can you please post pictures of your ferrari with carbon fibre modifications i want to buy paddle shifters along with other stuff can you guys recommend some good and cheap place for buying parts thanks
     
  2. Ricambi America

    Ricambi America F1 World Champ
    Sponsor Owner

    Dec 7, 2003
    16,451
    Winston Salem, NC
    #2 Ricambi America, Aug 26, 2011
  3. blackbolt22

    blackbolt22 F1 Veteran
    Silver Subscribed

    Sep 25, 2007
    5,808
    Boca Raton, FL
    Full Name:
    Mr. Anderson
    #3 blackbolt22, Aug 26, 2011
    Check with MA Carbon as well as Ricambi. Also a sponsor.
     
  4. MarcusCLT

    MarcusCLT Karting

    Nov 22, 2010
    99
    Charlotte, NC
    Full Name:
    Steen
    #4 MarcusCLT, Aug 27, 2011
    Last edited by a moderator: Sep 7, 2017
  5. Gliozzi

    Gliozzi Karting

    May 6, 2011
    84
    Oakdale Calif.
    Full Name:
    Bob
    #5 Gliozzi, Aug 27, 2011
    Ball park price on the interior of the 360?

    Can not make out the web site.

    Thanks bob
     
  6. netman

    netman Formula 3

    Jun 17, 2008
    1,905
    OC SoCal
    #6 netman, Aug 27, 2011
    Last edited by a moderator: Sep 7, 2017
    I have replaced some parts with CF and had others that cannot be reproduced in CF painted via a hydroclading process. Here is a pic of my CF airboxes and hydroclad coolant tank.

    Gemico. net did the hydroclading
    Max-speed motorsports provided the air boxes, door panels, rocker panel thresholds
    Image Unavailable, Please Login
     
  7. netman

    netman Formula 3

    Jun 17, 2008
    1,905
    OC SoCal
    #7 netman, Sep 2, 2011
    Last edited by a moderator: Sep 7, 2017
  8. F430addict

    F430addict F1 Rookie

    Sep 17, 2010
    4,460
    #8 F430addict, Sep 2, 2011

    Looks great!
     
  9. djastral69

    djastral69 Formula 3
    Silver Subscribed

    Aug 6, 2007
    1,896
    Fl
    Full Name:
    David
    #9 djastral69, Sep 2, 2011
    What is a 'Hydroclading' process?
     
  10. netman

    netman Formula 3

    Jun 17, 2008
    1,905
    OC SoCal
    #10 netman, Sep 2, 2011
    Basically they apply graphic paint in water. The piece is submerged. then the graphic paint is applied to the top of the water and the piece is then pulled up and through the graphic paint.

    David; check out www.gemico.net. If you are near Tampa you can go and see the process first hand.
     
  11. djastral69

    djastral69 Formula 3
    Silver Subscribed

    Aug 6, 2007
    1,896
    Fl
    Full Name:
    David
    #11 djastral69, Sep 2, 2011
    Last edited: Sep 2, 2011
    Thanks Netman, that is pretty impressive. How long have they been doing this type of service? What was the cost to do your coolant tank and engine bay panels? I too have a spider and would love to get this done.

    'D
     
  12. Chupee

    Chupee Formula Junior

    Jul 10, 2009
    832
    Between Trust funds
    Full Name:
    Blair
    #12 Chupee, Sep 3, 2011
    Last edited by a moderator: Sep 7, 2017
  13. burner42

    burner42 Formula Junior

    Jan 21, 2011
    624
    Dallas, Texas
    Full Name:
    Myles
    #13 burner42, Sep 3, 2011
    Last edited by a moderator: Sep 7, 2017
    My entire interior is Carbon, I also have Carbon Airboxes and the Carbon Hamman Rear Diffusor. Mine was all purchased through Ricambi, It is Carbonio. I want the carbon strips on both sides of the engine glass, and the 2 panels on either side of the engine inside the engine compartment...
    Image Unavailable, Please Login
    Image Unavailable, Please Login
    Image Unavailable, Please Login
    Image Unavailable, Please Login
    Image Unavailable, Please Login
    Image Unavailable, Please Login
    Image Unavailable, Please Login
     
  14. djastral69

    djastral69 Formula 3
    Silver Subscribed

    Aug 6, 2007
    1,896
    Fl
    Full Name:
    David
    #14 djastral69, Sep 3, 2011
    Hey Burner, how does your cup holder work being that the E-brake handle looks like it would get in the way if you had a drink there.
     
  15. burner42

    burner42 Formula Junior

    Jan 21, 2011
    624
    Dallas, Texas
    Full Name:
    Myles
    #15 burner42, Sep 3, 2011
    Bottled water, gatorade bottles etc are all fine. To Go Cups are a no go, especially any thing bigger than a medium size. The handle barely pushes them to the left if they are too wide at the top.
     
  16. jim94-348

    jim94-348 Formula Junior
    Owner Silver Subscribed

    Aug 19, 2010
    981
    Greenville, NC
    Full Name:
    Jim
    #16 jim94-348, Sep 3, 2011
    What is the best thing to use to clean the carbon fiber? Is there anything to stay away from?
     
  17. djastral69

    djastral69 Formula 3
    Silver Subscribed

    Aug 6, 2007
    1,896
    Fl
    Full Name:
    David
    #17 djastral69, Sep 3, 2011
    Best thing I have found barely damp micro fiber towel as the surface is not porous.
     
  18. netman

    netman Formula 3

    Jun 17, 2008
    1,905
    OC SoCal
    #18 netman, Sep 5, 2011
    Not sure as to how long. The coolant tank was 300.00 to paint and the engine bay panels were 800.00. You will need to replace the heat sheild material on the back of the engine bay panels to protect the F1 system and some other bits. The heat shielding can be had for about 40.00. via the Internet.

    There are other colors besides black if you are interested.

    Post some pics if you do have it done.
     

Share This Page