Carbon Fiber Shift Knobs & Door Sills | FerrariChat

Carbon Fiber Shift Knobs & Door Sills

Discussion in 'South Central - USA (TN, MS, AL, GA)' started by Mike C, Dec 13, 2003.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. Mike C

    Mike C F1 Veteran
    Lifetime Rossa Owner

    Aug 3, 2002
    Southeast USA
    Full Name:
    Mike Charness
    For those of you who noticed and asked about my carbon fiber shift knob at our Talladega event a few weeks ago, I just got 5 more from the manufacturer. They're $110 including shipping. The one you saw on my car was the prototype; the production models have a cleaner 5-speed pattern under the resin. They're sized larger than the stock 308/328/348/TR knobs... they're more similar to the size used in 355's and 360's, which fit it your hand better.

    They're still working on the carbon fiber door sills to replace the aluminum ones, and they'll fit either 308's or 328's (same part number for both). I should have the prototype set here in a few weeks.


Share This Page