Carrera GT ends.

The manufacture of the most successful supercar in history has come to an end. Production of the Carrera GT at Porsche’s facility in Leipzig, Germany, concluded on Saturday, May 6, 2006, bringing to a close the latest series in a line of ultra-exclusive and ultra-performing automobiles from Porsche.

In its brief production run, and befitting its ethereal performance, the award-winning Carrera GT was named “Best Dream Car 2004” by Road & Track magazine, and “Best Dream Machine” by the popular MotorWeek television program in 2005. “Even a short ride in this carbon-fiber wonder-car will spoil you for the rest of your life,” said MotorWeek host John Davis. “The Carrera GT is the best motivation to get rich that we’ve ever driven.”

Even in an economic climate that did not favor products in this segment of the market, Porsche’s V-10 powered supercar has sold in unprecedented numbers. More than 1,270 Carrera GTs have been sold since its introduction in late 2003. To date, 604 have found homes in North America. This figure represents a greater number than the total production of the McLaren F1, Ferrari Enzo, and Pagani Zonda models combined.

The Carrera GT is a storied member in a line of limited edition supercars, a lineage born from Porsche’s experience at the highest levels of world-class endurance racing. The Carrera GT owes its product modeling as an exclusive, racing-derived, ultra-high-performance roadcar to Porsche’s first supercar, the 959. Storming the world automotive stage at the Frankfurt Auto Show in 1985, the 959 was intended for “Group B” racing competition, and served as Porsche’s technology flagship—a rolling paradigm of automotive performance from which future models could draw even loftier benchmarks.

The Carrera GT supercar also had its genesis in the racing program, but instead became a street-only machine. The Carrera GT evolved from a 5.5-liter V-10 engine program originally developed for endurance competition. Enlarged to 5.7-liters for the production car, the naturally aspirated Carrera GT’s V-10 produces 605 (SAE) horsepower at 8,000 rpm, and this power is routed through a production car first—Porsche’s Ceramic Composite Clutch (PCCC®). Only 6.65 inches (169mm) in diameter, the race-caliber clutch easily handles the Carrera GT’s prodigious output while allowing the entire powertrain to sit lower in the chassis, dropping the center of gravity for even sharper handling.

The Carrera GT’s wide use of cutting edge materials prompted Popular Science magazine in 2003 to name the exotic machine the “Best of What’s New” for its advanced technology and chassis development. The Carrera GT’s monocoque chassis is constructed from bonded layers of carbon fiber tissue, resin, and aluminum and plastic honeycomb materials that are incredibly light, but strong. The entire chassis weighs just over 220 pounds (100 kg), and is mated to equally esoteric materials including forged magnesium wheels, and the staggering 380mm Porsche Ceramic Composite Brakes (PCCB®).

Thanks to near fanatical attention to weight savings, the performance results are stunning. The Carrera GT will accelerate from a standing start to 62 mph (100 km/h) in only 3.9 seconds, at which point, things really get going. The 99 mph (160 km/h) mark arrives in less than seven seconds, 124 mph (200 km/h) in under 10 seconds, and the Carrera GT can achieve a top test-track speed of 205 mph (330 km/h). Despite the otherworldly performance, the Carrera GT is still one of few supercars that can be driven every day. Traction control, air conditioning, GPS navigation, a Bose audio system, and a fitted, 5-piece, matched-leather luggage set are standard equipment. The Porsche Carrera GT first went on sale in North America on January 31, 2004, and pricing for this ultimate Porsche supercar is $440,000 (USD).

Porsche Cars North America, Inc. (PCNA), based in Atlanta, GA, and its subsidiary, Porsche Cars Canada, Ltd., are the exclusive importers of Porsche sports cars and Cayenne® sport utility vehicles for the United States and Canada. A wholly owned, indirect subsidiary of Dr. Ing. h.c. F. Porsche AG, PCNA employs approximately 300 people who provide Porsche vehicles, parts, service, marketing and training for its 213 U.S. and Canadian dealers. They, in turn, provide Porsche owners with best-in-class service.
Image Unavailable, Please Login
Image Unavailable, Please Login
Image Unavailable, Please Login
Image Unavailable, Please Login
Image Unavailable, Please Login

 

Any sucessors planned?

 

Steve , the end of production was on April ( May was just an official date for prass maybe ?)... I was there just one week before it was closed ! I had a PRIVATE tour thru assembly line of this marvelous car !!!! I saw everything linked with production line there .I was even allowed to watch some documents ..... nothing speciall , really
It was great to see this car while building.......the best was the carbon fiber frame and rear chassie !!!!!
The assembly line of CGT was very well designed. In just few days they were able to remove it and prepare it for a nem model !!!

Here are some pics from my visit in Leipzig - no factory pics !!!
http://www.ferrarichat.com/forum/showthread.php?t=100000

Yes , Panamera !!!

 

Steve,

Do you have the URL for a hi-res download of the cutaway please or do you have it in higher res?

Cheers

SP

 

I do have a lot ......PM me your e-mail and I'll send you !!

Reg
Tad

 

Sigh...guess I have to buy mine used

 

Yes mate.

http://www.seriouswheels.com/2006/2006-Porsche-Carrera-GT-Cutaway-1920x1440.htm

 

Great post mate thanks.