CCM Brake discs/rotors | FerrariChat
Buy

CCM Brake discs/rotors

Discussion in 'Technical Q&A' started by caspian575, Mar 17, 2018.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. caspian575

    caspian575 Karting

    Jun 12, 2007
    154
    Cheshire UK
    Full Name:
    Roger Hayes
    #1 caspian575, Mar 17, 2018
    Took my 599 for annual service and health check and they flagged up an issue with the front brake rotor citing it was 30% worn, pin missing from bell and two small chips. what exactly does it mean? Does it mean a new rotor of can the "pin from the bell" be replaced?
     
  2. virendra

    virendra Formula Junior

    Jun 14, 2008
    251
    Hong Kong
    Full Name:
    virendra anand
    #2 virendra, Mar 17, 2018
    I have a smashed front disc/ rotor from a 599. The insides are fine. happy for you to have whatever you can use from it to restore your missing bits.
     
    StuR likes this.
  3. virendra

    virendra Formula Junior

    Jun 14, 2008
    251
    Hong Kong
    Full Name:
    virendra anand
    #3 virendra, Mar 17, 2018
    30% worn is just an observation to advise you of the remaining thickness. You need to check manufacturers specs to see what is the min thickness allowed.

    As for chips , it usually refers to any deformation / missing bits on the rotor which could be like a chunk taken off.
     
  4. caspian575

    caspian575 Karting

    Jun 12, 2007
    154
    Cheshire UK
    Full Name:
    Roger Hayes
    #4 caspian575, Mar 17, 2018
    Thanks for the offer, I feel like I need to ascertain what the item I am looking for actually is as I am in the UK as shipping a rotor may not be so easy, best make sure
     
  5. caspian575

    caspian575 Karting

    Jun 12, 2007
    154
    Cheshire UK
    Full Name:
    Roger Hayes
    #5 caspian575, Mar 18, 2018
    I am attaching a jpeg image of the offending item my dealer says is missing and wants $7K to replace. Does anyone recognize it? Is it for example an integral part of the rotor it? What is its purpose? Does it not being there make the car unsafe to drive?
    Image Unavailable, Please Login
     
  6. HeavyR

    HeavyR Karting

    Jan 31, 2012
    50
    Devon
    Full Name:
    harvey jones
    #6 HeavyR, Mar 19, 2018
    The bolt has snapped off that attaches the rotor to the alloy bell, these bolts are installed by Brembo and should not be slackened ,swapped and re-torqued . Minimum thickness is not as important as the weight of a CCM disc .under braking the carbon comes out of the disc making the disc lighter rather than thinner .
     
  7. andyww

    andyww F1 Rookie

    Feb 7, 2011
    2,775
    London
    #7 andyww, Mar 19, 2018

Share This Page