Center caps and CS wheels | FerrariChat

Center caps and CS wheels

Discussion in '360/430' started by Philly, Jul 24, 2017.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. Philly

    Philly Karting

    Joined:
    Aug 23, 2012
    Messages:
    203
    Location:
    Maryland
    Full Name:
    Phil Gelso
    Hey why don't my starfish center caps fit my CS wheels??
     
    Philly, Jul 24, 2017
    #1
  2. 24000rpm

    24000rpm F1 Rookie

    Joined:
    Aug 31, 2012
    Messages:
    4,653
    Location:
    China and California
    really? mine fits perfectly.

    one possibility, your star fish cap isn't oem, or maybe for another model?

     
    24000rpm, Jul 24, 2017
    #2
  3. Ricambi America

    Ricambi America F1 World Champ Sponsor Owner

    Joined:
    Dec 7, 2003
    Messages:
    16,451
    Location:
    Winston Salem, NC
    Do you have the 18" Challenge wheels, or the 19" Challenge Stradale wheels?

    Indeed the 19" CS wheels use the 340066 cap, while the 18" race wheels only seem to fit with wheel cap 188828.
     
    Ricambi America, Jul 25, 2017
    #3
  4. Philly

    Philly Karting

    Joined:
    Aug 23, 2012
    Messages:
    203
    Location:
    Maryland
    Full Name:
    Phil Gelso
    They're 18 " challenge wheels - so I guess I need 188828 x4
     
    Philly, Jul 26, 2017
    #4
  5. RedNeck

    RedNeck F1 World Champ Silver Subscribed

    Joined:
    Jul 8, 2016
    Messages:
    12,322
    Location:
    The CSA
    Full Name:
    Me
    You just need a bigger hammer
     
    RedNeck, Jul 26, 2017
    #5
  6. Mickster

    Mickster Formula Junior

    Joined:
    Oct 24, 2015
    Messages:
    608
    Location:
    Sweden
    Full Name:
    Mikael Andersson
    Aaaaahahahaha 😂
     
    Mickster, Jul 26, 2017
    #6
  7. John_K_348

    John_K_348 F1 Rookie

    Joined:
    Sep 20, 2013
    Messages:
    2,754
    Location:
    Boston, MA
    Full Name:
    John E. Kenney
    Hahaha, ha, ahhhhh, wait that makes me sad :(

    Sure enough, the specs can vary ever so slightly. When I rolled my fenders this past weekend, I found the tool's hub holes and conical washers all needed to be ground out a little so the Ferrari bolts would fit through them. I guess it was Tuner focused ;) Good thing was, Hill wheel spacers and stock 55mm bolts fit great and held firmly with no slop. I also love the fact that my OZ Superleggera IIIs are the same diameter as the Challenge race wheels :D Stock Spider center caps fit fine!
     
    John_K_348, Jul 26, 2017
    #7

Share This Page