Center console plastic bezel removal | FerrariChat

Center console plastic bezel removal

Discussion in 'Boxers/TR/M' started by WDR328, Jan 14, 2007.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. WDR328

    WDR328 Formula 3

    Dec 11, 2003
    1,476
    The Bugscuffle Inn
    Full Name:
    D. Rose
    Has anyone taken the plastic bezel that houses all of the electric components in the center console out. Mine has the sticky syndrome and I need to clean up some of the pieces. I have the bezel partially removed in the back but it appears to be bolted in the front where the vacuum switch is located. I would appreciate any help.
     
  2. uzz32soarer

    uzz32soarer F1 Rookie

    Sep 9, 2006
    3,090
    Melbourne, Australia
    Full Name:
    Robert Hayden
    Not sure about the 512M, but on the Testa you lift it up at the rear after removing the single screw behind the console light, then when it is clear, simply slide it all towards the rear. There is a 3/8th tab at the front which on a Testa, slides under the coin holder.
     

Share This Page