My carbon fiber 1 piece finally arrived. Looks awesome....
Yes, how much? Having done my car (painting)...It seems you may have a problem. The stock one is 3 pieces that allows you room to plug/unplug your rocker switches. To remove the old see the center consol bubbling thread, there's step by step instruction. Takes less than 10 minutes to remove. To install, you will need to begin at the top rocker switches and start moving down. Boy, that will have to be a precise fit! All you need is a screwdriver except when you do the A/C controls, to remove the knobs you will need a tiny snap ring remover tool...if you don't have one just take the unit to a local gas station and ask them to unsnap the rings...most guys won't mind.
Yes it is for a 355. It's 1 piece that will fit into the 3 pieces perfectly. The supplier was Valence USA. Click sponsors and you'll get their info. Mine was the first 1 piece they made, so it's not on their web site yet.
Yes it has hinges, the ash try is the same as the 3rd piece. it opens so you can get to the cig lighter
This does look like the ultimate fix ... Again .. a) How much did it cost? b) Do you still get the GREEN illumination through the decals .. looks like there's no color in the photos. Regards, Pete
Call Brian or Chris. They will give you the cost. My cost might have been different since they designed it for me and it was the first one. It will not illuminate, but it is bright enought that you will be able to see the writing with the dashboard lights. My car is in for 15K service and they are installing it for me (althought Brian/Chis said it's an easy do it yourself install). When I get the car back in a week or so, I will take pics of it installed.
Here are some pics of the piece installed Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login
