Central FL Dyno and ECU tuner shop??? | FerrariChat
Buy

Central FL Dyno and ECU tuner shop???

Discussion in 'Florida' started by mr_bock, Aug 5, 2013.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. mr_bock

    mr_bock Formula 3

    Oct 27, 2006
    1,373
    FL full time
    #1 mr_bock, Aug 5, 2013
    I am in the process of getting my 2001 360's exhaust back in the car (I blew the CAT bung out at Sebring two weeks ago) after making the repairs. My car has headers, Kinetix High Flow CATS, and FabSpeed muffler. I want to get some dyno pulls for hp/torque along with Air/Fuel ratio readings. Also I would like it they have the capability to tune the ECU(s) to correct if I am running lean.

    I would like to get some recommendations for a Central Florida shop that can do all of this.

    Many Thanks in advance!!!!!!!!!
    What a great place or what!!!!!
     
  2. Nativetroy

    Nativetroy F1 Veteran
    Rossa Subscribed

    Nov 29, 2010
    5,990
    central fl
    Full Name:
    Troy
    #2 Nativetroy, Aug 5, 2013
    I know there are several import shops and mustang and other American tuners, not sure about exotics, other than Titan. Think they do more high end import, but worth a call. Also, SuperChips used to be in Sanford, and had a dyno they used for testing/custom tunes. Haven't been there in years though. Just some places to look into.
     
  3. mr_bock

    mr_bock Formula 3

    Oct 27, 2006
    1,373
    FL full time
    #3 mr_bock, Aug 6, 2013
    nativetroy,

    Thanks for your input. I did talk to Titan and they are so busy with the cars that they build, that they don't take in cars like mine. Also they can't access my ECUs.

    I will check out SuperChip and see if they can help.

    Thanks!!!!!
    George
     
  4. Rosso328

    Rosso328 F1 Veteran
    Owner Rossa Subscribed

    Dec 11, 2006
    7,345
    Central FL
    Full Name:
    Paul
    #4 Rosso328, Aug 6, 2013
    If you're looking for other options to explore, I ran into a guy at a Sebring track event a couple of months back. Not sure if he has worked on Ferraris specifically, but he seemed to know what he was talking about generally.

    His name is Mike Keane, and the shop is called Performance Race solutions in Sanford. (407) 878-5870 - Performance Race Solutions

    I can't give a recommendation as such because I haven't made it up to the shop to check it out yet. Just offering up another lead.
     
  5. mr_bock

    mr_bock Formula 3

    Oct 27, 2006
    1,373
    FL full time
    #5 mr_bock, Aug 6, 2013
    Rosso328,

    I just talked with Will at Performance Race Solutions... The can do the dyno and get the Air/Fuel ratio readings. He has to check to see if they can access the ECUs. This is good!!!!!!

    I should have my car back on the road in a week and will make an appointment.

    Thanks!!!!!! What a great site and great people!!!!!!
     
  6. gatorgreg

    gatorgreg Formula 3
    Rossa Subscribed

    Dec 13, 2004
    1,944
    NAPLES
    Full Name:
    Greg Griffin
    #6 gatorgreg, Aug 7, 2013
    Speedworks in Osteen, Fl talk to Bill.
     
  7. mr_bock

    mr_bock Formula 3

    Oct 27, 2006
    1,373
    FL full time
    #7 mr_bock, Aug 31, 2013
    I am set for this Tuesday at Mase Engineering in Jacksonville. They will dyno, air/fuel ratio, get rid of O2 CEL and some performance tune.

    One stop service. I will post dyno print out.

    Thanks all for the suggestions.
     
  8. Nativetroy

    Nativetroy F1 Veteran
    Rossa Subscribed

    Nov 29, 2010
    5,990
    central fl
    Full Name:
    Troy
    #8 Nativetroy, Sep 1, 2013
    Cool, looking forward to seeing the results.
     
  9. Moopz

    Moopz F1 Veteran
    Owner Rossa Subscribed

    Jun 29, 2004
    5,558
    Orlando, FL
    #9 Moopz, Sep 3, 2013
    Update??
     
  10. mr_bock

    mr_bock Formula 3

    Oct 27, 2006
    1,373
    FL full time
    #10 mr_bock, Sep 5, 2013
    Last edited by a moderator: Sep 7, 2017
    Here is the update....

    Steve, owner of Mase Engineering worked his magic.

    He did a few dyno pulls to get baseline data. Then the ECU tweaking and reflash.
    He got rid of the O2 sensor CEL issue because of the headers and high flow CATS.
    Adjusted the air/fuel ratio. Adjusted the throttle response map. Tweaked the performance a bit that gained about 17 rwhp to 348.7. This is about what was expected. Torque is about 257 Ftlb at 5,220 rpm.

    So far no CEL light after driving back from Jacksoville to Titusville.

    Here is the dyno print out:

    All looking fine, feels fine, runs fine!!!!
    Image Unavailable, Please Login
     
  11. Nativetroy

    Nativetroy F1 Veteran
    Rossa Subscribed

    Nov 29, 2010
    5,990
    central fl
    Full Name:
    Troy
    #11 Nativetroy, Sep 5, 2013
    Glad to hear it worked out for you. Between the exhaust and tune, noticeable difference?
     
  12. Wade

    Wade Three Time F1 World Champ
    Owner

    Mar 31, 2006
    32,793
    East Central, FL
    Full Name:
    Wade O.
    #12 Wade, Sep 5, 2013
    Very nice! I always wanted to run one of mine just to see the specs.
     
  13. mr_bock

    mr_bock Formula 3

    Oct 27, 2006
    1,373
    FL full time
    #13 mr_bock, Sep 5, 2013
    Too soon to tell, I am finishing up some other work on the car that prevents me from driving it just yet. I should be good to go this Tuesday/Wednesday to do some seat-of-the-pants testing.
     

Share This Page