Ceramic Brake Disc Hardware… Anyone? | FerrariChat
Buy

Ceramic Brake Disc Hardware… Anyone?

Discussion in 'Technical Q&A' started by Rippin6Gears, Feb 18, 2024.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. Rippin6Gears

    Rippin6Gears Rookie

    Oct 23, 2016
    22
    Seattle
    Full Name:
    M
    #1 Rippin6Gears, Feb 18, 2024
    I been searching and searching… I can’t seem to find anyone who sells hardware for carbon ceramic disc brakes. Looking to do a little project in the garage, I don’t need the entire disc brake hence not spending $1000+ for just some hardware.
     

    Attached Files:

  2. Ferrari Tech

    Ferrari Tech Formula 3

    Mar 5, 2010
    1,213
    Georgia
    Full Name:
    Wade Williams
    #2 Ferrari Tech, Feb 19, 2024
    What part of the hardware do you need and how many?
     
  3. Challenge

    Challenge Formula 3

    Sep 27, 2002
    2,006
    PA
    Full Name:
    Kevin
    #3 Challenge, Feb 19, 2024
    The bolts and nuts securing the Brembo 2-piece rotors are one-time use. The bolts' thread pitch is tapered such that the nut bites into and locks on. From my research, Brembo will not publicly reveal the torque specs on this hardware. And you should never have to re-torque them.

    I did see one video online where a Lambo owner was able to get a set of these carriage style bolts, nuts and retaining clips. From memory, he was replacing the rotors with non-OEM while using the OEM hats. Will try to find it.
     

Share This Page