Challenge cats + exhaust installing to a 360? | FerrariChat
Buy

Challenge cats + exhaust installing to a 360?

Discussion in '360/430' started by ttdang123, May 27, 2010.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. ttdang123

    ttdang123 Formula Junior

    Nov 28, 2009
    706
    North San Diego CA
    Full Name:
    Tung
    #1 ttdang123, May 27, 2010
    Last edited: May 27, 2010
    Hi

    Need your help and opinions.

    I located a new set of 360 challenge cats + exhaust. I am thinking about mounting them on my 2003 360 spider. I was wondering if:

    1) Are these direct fits? (I think they are)
    2) Can I add a dual Titanium tips to the single exhaust port of the Challenge exhaust? I like the look of the dual tips.
    3) Does the Challenge exhaust have the by-pass valve similar to the "regular" 360 exhaust so it would not be too loud in the neighborhood?

    Any comments/opinions on the above would be greatly appreciated.
     
  2. Ingpr

    Ingpr F1 Rookie

    Jun 30, 2009
    2,619
    PR
    Full Name:
    David
    #2 Ingpr, May 27, 2010
    Last edited by a moderator: Sep 7, 2017
    I don’t think that the bracket that holds the exhaust to the tranny is not the same as the 360. You can add a set of tips but you will need a very good welder to accomplish it. The stock challenge system does not come with the valves. You can use your set of original tips with the valves and change the tails with a chrome unit(Like I did with my stock tails and my Maxspeed chrome tips).
    Image Unavailable, Please Login
     
  3. ttdang123

    ttdang123 Formula Junior

    Nov 28, 2009
    706
    North San Diego CA
    Full Name:
    Tung
    #3 ttdang123, May 27, 2010
    David

    Thank you for the inf.

    Maybe the Challenge cats + Capristo twin sound exhaust with remote is the better combo to me.
     

Share This Page