Check Engine on a Superamerica | FerrariChat
Buy

Check Engine on a Superamerica

Discussion in '456/550/575' started by hogbreth, Apr 10, 2007.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. hogbreth

    hogbreth Karting

    Oct 23, 2006
    119
    Florida
    Full Name:
    John Bennett
    #1 hogbreth, Apr 10, 2007
    A fellow in my town has an 05 Superamerica with the automatic. He has a check engine light on so we hooked up an OBD2 with the correct patch cable and the system says there is no light on and shows no Codes. What are we missing?
    Thanks for the help.
    John Bennett
    99 550
     
  2. hogbreth

    hogbreth Karting

    Oct 23, 2006
    119
    Florida
    Full Name:
    John Bennett
    #2 hogbreth, Apr 11, 2007
    Hey guys someone must have some ideas. PLEASE
     
  3. GCalo

    GCalo F1 Veteran

    Sep 15, 2004
    7,645
    Northern California
    Full Name:
    Greg Calo
    #3 GCalo, Apr 11, 2007
    If there are no codes maybe there is no problem.

    Maybe you have a faulty sensor.

    I would also slowly remove the gas cap to sense it's degree of tightness

    Maybe since last fueling he did not have it fully tight!

    This is a common Ferrari code sender.
     
  4. Rifledriver

    Rifledriver Three Time F1 World Champ

    Apr 29, 2004
    37,101
    Cowboy Capitol of the World
    Full Name:
    Brian Crall
    #4 Rifledriver, Apr 11, 2007
    I have seen that before. Usually an SD will show an error. It needs to be hooked up to the real tool, or you can try to erase it and see if it comes back.
     

Share This Page