Cleaning 355 Challenge seats in situ

1: Leaving it a bit late
2: Millard
3: I'll have a look tomorrow, but I don't recall them being glued down

 

Have you considered a heated extractor?

 

When Indidnmy seats I glued foam onto the seat but the red cover is held into place by a string that you tension to lock it into position. You may need to unbolt the seat but you can access the string and release the tension to free the cover from the seat.

 

Get this. It connects to your air compressor and blows a fine stream of water and soap that blasts dirt loose. As you use it simply wipe the residue with towels. Great on carpet too. I’d only use the soap packets that are branded the same

https://www.amazon.com/Tornador-Car-Cleaning-Tool-Z-010/dp/B0024J6JMI/ref=asc_df_B0024J6JMI/?tag=hyprod-20&linkCode=df0&hvadid=312061076118&hvpos=&hvnetw=g&hvrand=13078743436766342340&hvpone=&hvptwo=&hvqmt=&hvdev=t&hvdvcmdl=&hvlocint=&hvlocphy=9009980&hvtargid=pla-493152063290&psc=1&tag=&ref=&adgrpid=62430536632&hvpone=&hvptwo=&hvadid=312061076118&hvpos=&hvnetw=g&hvrand=13078743436766342340&hvqmt=&hvdev=t&hvdvcmdl=&hvlocint=&hvlocphy=9009980&hvtargid=pla-493152063290

 

Seats are no good JM. Time to part ways with them.

 

Haha. I’m happy to help.

 

I’d double-check on that JM. You should be able to buy the cover “material,” but not the actual cover. It’s also a new updated version of Nomex.

As for the seats… no way in hell you can still buy them. Triple check .

 

Who makes them? Show me.

 

I had both of my 355 challenge seats redone a few years ago. The material isn’t complicated to source, any decent trimmer can do it easily when you supply the old cover.
They even reproduced accurately the sitching on the headrest.

 

Spoke to Liuck420. He’s LMclassicauto on Instagram. Perhaps I misunderstood, but he made/sourced reproductions of the period correct Nomex material, not the seat itself. The seat can’t be reproduced unless one can source the exact plastic belt hoops.

He also denies ever working for OMP.

 

Pics?

 

I’d probably go with F40 material. Seems slightly more durable. Original Nomex isn’t the greatest .

 

What OMP location?
They would not give me the time of day

I need like3 sets for my cars