Cleaning foam polishing pads | FerrariChat
Buy

Cleaning foam polishing pads

Discussion in 'Detailing & Showroom' started by enzoformenh, Jul 19, 2012.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. enzoformenh

    enzoformenh Formula Junior
    Silver Subscribed

    Aug 26, 2004
    655
    NH
    Full Name:
    Mike F
    #1 enzoformenh, Jul 19, 2012
    I realize I didn't buy any polishing pad cleaner when I bought everything else and so I'm wondering what else I could use to clean the pads when I'm done. Is it just a mild detergent or is it something special to break down the polishing solution? I'm using Pinnacle XMT products.

    Thanks,
    Mike
     
  2. luv2detail

    luv2detail Formula 3
    Silver Subscribed

    Mar 30, 2006
    2,289
    North Carolina & SoCal
    Full Name:
    Jason
    #2 luv2detail, Jul 20, 2012
    Never used XMT, but just run the pads under the faucet, using your thumbs to break up the polish. If you do it as soon as you're done, it should wash right out. Don't let the polish dry on the pads.
     
  3. furnacerepair

    furnacerepair Formula Junior

    Feb 9, 2009
    744
    Wisconsin
    Full Name:
    Martini
    #3 furnacerepair, Jul 20, 2012
    I use a couple drops of dish soap. Wash and rinse really well in warm water. They come out like new.
     
  4. enzoformenh

    enzoformenh Formula Junior
    Silver Subscribed

    Aug 26, 2004
    655
    NH
    Full Name:
    Mike F
    #4 enzoformenh, Jul 20, 2012
    I used both suggestions. For the XMT level 1 swirl remover water did the trick. For the polish it took a little disk soap to cut through the wax. Thanks for your help.
     
  5. Connor.Harrison

    Connor.Harrison Karting

    Jul 21, 2012
    64
    Madison, WI
    Full Name:
    Connor Harrison
    #5 Connor.Harrison, Jul 23, 2012
    Personally, I use Meguiars Super Degreaser at a low dilution (15:1). I don't always get around to cleaning them right away, and even when they sit for weeks (or months) I've never had a problem getting them completely clean again.
     

Share This Page