Clear film protector on 360 / Stradale lower vents | FerrariChat
Buy

Clear film protector on 360 / Stradale lower vents

Discussion in '360/430' started by tuonoR, Aug 25, 2010.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. tuonoR

    tuonoR Formula Junior

    Apr 22, 2006
    319
    #1 tuonoR, Aug 25, 2010
    I am having Premier re-create the OEM film that protects the leading edge on the side vents of the Stradale (the factory pieces yellow pretty quickly). These are the roundish vents that sit behind the doors and just above the rockers.

    My car didn't have these pieces on it when I bought it, so I don't have a reference for the orientation / location of the film pieces. Can anyone point me in the right direction? Pieces are assymetric in both directions.

    Would save me a trip to the showroom to find another 360 that still has these bits applied, thanks in advance.
     
  2. scott40

    scott40 Formula Junior
    Silver Subscribed

    Apr 4, 2006
    958
    Ohio
    Full Name:
    Scott
    #2 scott40, Aug 25, 2010
    I would recommend just having them cover the whole area. The factory bits don't provide much protection.
     
  3. GS Lee

    GS Lee Rookie

    Apr 11, 2004
    31
    Dallas, Texas
    Full Name:
    Greg Lee
    #3 GS Lee, Aug 25, 2010
    I agree,I recently had the original clear protectors replaced with new material covering a greater area when I had a clear bra installed.

    A quality installer can blend the material in and make it practiacally invisible.

    GS
     
  4. nizam

    nizam Formula 3
    Owner Silver Subscribed

    Jul 9, 2004
    1,563
    San Jose, CA
    Full Name:
    Ni Zam
    #4 nizam, Aug 25, 2010
    I agree with Scott, just cover the whole side skirt / lower vents. Those take a beating.
     
  5. Need4Spd

    Need4Spd F1 Veteran

    Feb 24, 2007
    6,678
    Silicon Valley
    #5 Need4Spd, Aug 25, 2010
    Yeah. Mine are beat up and need replacing. Hood and front bumper still in good shape though. Suggestions for a good shop in San Francisco proper?
     
  6. tuonoR

    tuonoR Formula Junior

    Apr 22, 2006
    319
    #6 tuonoR, Aug 25, 2010
    I may decide to have them wrapped more extensively when the rockers need a respray in 5-10 years. For now, I sorta like the idea of just replacing the film pieces and preserving the factory details.

    If anyone can help out with the original request, would be much appreciated.

    Need4Speed -- give Premier Protective Films on the penninsula a call. Their Orange County location is replicating the factory diecuts for me in Ventureshield but they would be the only guys I'd call for a wrap.
     
  7. tuonoR

    tuonoR Formula Junior

    Apr 22, 2006
    319
    #7 tuonoR, Aug 29, 2010
    Anyone with a car still sporting the original films willing to take a quick photo?
     

Share This Page