Clock & gauge repair, Nicka are you out there? | FerrariChat
Buy

Clock & gauge repair, Nicka are you out there?

Discussion in '308/328' started by kossevv, Jan 21, 2016.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. kossevv

    kossevv Karting

    May 7, 2015
    110
    Houston, TX
    Full Name:
    Veso Kossev
    #1 kossevv, Jan 21, 2016
    Hey Guys,

    In searching the forum I found info for Nick (Radiopilot) and send him a PM but from what I can see on his profile it says he hasn't been active on the site since 2013. Not sure if I'm reading that right but wanted to see if there are any other recommendations for who can repair the clock. My oil temp gauge next to the clock isn't working as well so they both need to be repaired. I found the info on Palo Alto Speedometer and called them, just wanted to see if there is anyone else out there.

    Thanks guys!
     
  2. Dorsetgem

    Dorsetgem Karting

    Nov 15, 2014
    115
    Verwood UK
    Full Name:
    Glen
    #2 Dorsetgem, Jan 21, 2016
    I repaired my clock, for $22 aud. There isn't many parts to it. Check the resistance of the motor mine was around 300ohms from memory. I then ordered the 8 pin ic from the UK and it cost me about 6 GBP and another 6GBP for postage. Then its just a case of desoldering the old ic and soldering the new one. There are only 5 pins to solder so its not too hard. If you search on a previous thread I gave all the codes and suppliers details on where to purchase the chip.
     

Share This Page