360 - Clutch adjustment | FerrariChat
Buy

360 Clutch adjustment

Discussion in '360/430' started by MarioCG, Aug 28, 2023.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. MarioCG

    MarioCG Rookie

    Aug 13, 2022
    24
    Norway
    Full Name:
    Mario
    #1 MarioCG, Aug 28, 2023
    I have a 360 Modena 1999 model, th ECU is from what i have found out the first version(not possible to adjust PIS by a computer). Is there some other way of adjust this on that car? Or to adjust the clutch at all? It has F1 gear. It was at a local workshop here and changed battery and they read out error codes and deleted them. When i get it back it was a total different car to drive, when it changes gears its way different than before. I just wonder if they deleted some settings for the clutch or gears?
     
  2. swc5150

    swc5150 Formula Junior
    Rossa Subscribed

    Jan 5, 2021
    729
    Wisconsin
    Full Name:
    Scott Calderwood
    #2 swc5150, Aug 28, 2023
    I don't know for certain in a '99 360, but you can try a soft relearn. I stole the process from another user... Start the car (after waiting for "Ok" of course), foot on the brake, pulled both paddles to put it in neutral and instead of releasing I held them in the pulled position. Within about 5-7 seconds the car beeped and the little red oil can (f1) icon flashed. Then release the paddles, put it in first and drive away.
     
  3. MarioCG

    MarioCG Rookie

    Aug 13, 2022
    24
    Norway
    Full Name:
    Mario
    #3 MarioCG, Aug 30, 2023
    Will test this out and see if it changes anything
     
  4. tazandjan

    tazandjan Three Time F1 World Champ
    Lifetime Rossa Owner

    Jul 19, 2008
    39,211
    Clarksville, Tennessee
    Full Name:
    Terry H Phillips
    #4 tazandjan, Aug 30, 2023
    The early TCUs will adjust PIS themselves, but will not let you change it manually. Have you had someone command a PIS adjustment?
     

Share This Page