CLUTCH DISC | FerrariChat
Buy

CLUTCH DISC

Discussion in '360/430' started by eastonh477, Aug 26, 2025 at 4:15 PM.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. eastonh477

    eastonh477 Rookie

    May 28, 2025
    6
    Full Name:
    Sean
    #1 eastonh477, Aug 26, 2025 at 4:15 PM
    I am going to a do a manual swap on my 360 the right way by replacing the throw out bearing. While in there it makes sense to do the clutch but mine was replaced a few thouasand miles ago and is at 28 percent worn. I still have 70 percent of the clutch left so I dont really want to spend 3k on a new clutch settup. Has anyone ever replaced just the disc? A disc is 500. Can a new disc make things worse somehow? I would resurface the flywheel still. So its pretty much either new disc or leave it completely. Thoughts?
     
  2. GogglesPisano

    GogglesPisano F1 Rookie
    Silver Subscribed

    Sep 13, 2022
    3,254
    East Bay, California
    Full Name:
    Joe
    #2 GogglesPisano, Aug 26, 2025 at 5:15 PM
    70 percent based on a digital reading or has someone actually inspected it?

    The disk is included with the pressure plate as an assembly so not really an option to do "only" the disc. At least that's what I see in the parts diagram.
     
  3. eastonh477

    eastonh477 Rookie

    May 28, 2025
    6
    Full Name:
    Sean
    #3 eastonh477, Aug 26, 2025 at 9:02 PM
    Just computer, i havent pulled the trans to check myself yet.Here is just the disc but it says only for manual not for f1. Not sure what difference is i thought all the clutches were the same except the Throwout bearing

    https://www.ferraripartsexchange.com/products/180613

    https://awitalian.com/product/ferrari-360-clutch-disc-180613/?srsltid=AfmBOoo764cOYOPJWxETwDLXkiLfPAKPNxa-Y-wTSpFy9CImiqLHaRXy
     

Share This Page