Clutch hose Mondial 3.2 | FerrariChat

Clutch hose Mondial 3.2

Discussion in 'Technical Q&A' started by 86mondi, Sep 4, 2022.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. 86mondi

    86mondi Rookie

    Aug 6, 2022
    39
    Virginia
    Full Name:
    Frank Buckman
    Is there a substitute part for the clutch hose on Mondial 3.2. This is the hose between the slave cylinder and the hard hydraulic line.

    Thanks!!!!
     
  2. 86mondi

    86mondi Rookie

    Aug 6, 2022
    39
    Virginia
    Full Name:
    Frank Buckman
    Thanks!!
     
  3. moysiuan

    moysiuan F1 Rookie
    Silver Subscribed

    Nov 1, 2005
    3,645
    Canada
    Aw Italian and other typical suppliers have them. They are not braided stainless covered like the oem one, rather they are the same as the reproduced brake lines, with a rubber hose and less visually clean crimped fittings.

    Might consider putting a heat shield tubing or wrap on it, it is close to header heat which must shorten its life.
     

Share This Page