Clutch Master Cylinder | FerrariChat
Buy

Clutch Master Cylinder

Discussion in '348/355' started by xplosive1, Jul 15, 2010.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. xplosive1

    xplosive1 Rookie

    May 15, 2008
    22
    #1 xplosive1, Jul 15, 2010
    Last edited: Jul 15, 2010
    Does anyone know where I can find a Clutch master cylinder for a F355?? Possibly used, otherwise, yes Ricambi is always there to the rescue. The master cylinder is seized, the plunger won't come back.

    Can this be rebuilt? Is there even a rebuild kit for one of these?
     
  2. PAP 348

    PAP 348 Ten Time F1 World Champ
    Lifetime Rossa Owner

    Dec 10, 2005
    100,220
    Mount Isa, Australia
    Full Name:
    Pap
    #2 PAP 348, Jul 15, 2010
    Can be rebuilt mate. Call your local brake specialist and have them look at it. There may be a universal seal kit that may fit. Or they may list a kit for a 355. :D:D

    Does Ricambi sell a kit to overhaul it does he? :):)

    And you reckon its seized in there?????? :eek::eek:

    Compression test, seized brake master cylinder. Did you just buy a 355 did you? :D:D
     
  3. xplosive1

    xplosive1 Rookie

    May 15, 2008
    22
    #3 xplosive1, Jul 15, 2010
    He actually doesn't sell a overhaul kit, I just meant I could get new if I had to.I've asked around about rebuilding it, but no luck as of yet. So I thought I would ask here.

    I've actually had the 355 for many years, its just been on the back back burner until now. So want to finally get it up and running.
     
  4. PAP 348

    PAP 348 Ten Time F1 World Champ
    Lifetime Rossa Owner

    Dec 10, 2005
    100,220
    Mount Isa, Australia
    Full Name:
    Pap
    #4 PAP 348, Jul 15, 2010
    Cool man, I reckon you should be able to have it rebuilt. There MUST be a seals out there somewhere that will fit. :D:D

    It shouldnt be an odd size. Again, a brake/clutch specialist shop should be able to help you. :):)

    In cases like this, it is the only way to go. I have been down this track many times with other makes and models of cars. :):)

    Good luck with getting the car running mate. :):)
     
  5. xplosive1

    xplosive1 Rookie

    May 15, 2008
    22
    #5 xplosive1, Jul 17, 2010
    Thanks Pap, appreciate the reply.

    I am going to see who I can contact, and what we can come up with to fix this clutch master cylinder.

    Do all F355's use the same clutch master cylinder?? (1995 -1999)? I saw this on ebay http://cgi.ebay.com/ebaymotors/1995-FERRARI-F355-CLUTCH-MASTER-CYLINDER-HYDRAULIC-OEM-_W0QQcmdZViewItemQQhashZitem1c1241b807QQitemZ120565381127QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories

    Something worth considering possibly? Never heard of this company before though.
     

Share This Page