Hi Guys, Trying to adjust my clutch and was wondering if the clutch pedal hight should be the same as the brake pedal. Currently it sits higher.
Should be the same height, adjustment is by the linkage rod under the servo cover. You need about 25mm [1"] free play Check the helper spring position [important for a nice light clutch] and clearance (2mm) at the thrust washer [via small inspection hatch] on the clutch housing. Best tony
Thanks Tony Thanks Tony, Under the servo cover now. Discovered there is no return spring on the clutch pedal And the rubber bump stop on the pedal adjuster is missing. What a pain to get in there!