Clutch replacement for CS | FerrariChat
Buy

Clutch replacement for CS

Discussion in '360/430' started by trainwrex, May 31, 2014.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. trainwrex

    trainwrex Formula Junior

    Sep 15, 2011
    280
    Perth, Australia
    #1 trainwrex, May 31, 2014
    Hi guys,

    I am needing to replace my clutch shortly on my CS

    Does anyone have recommendations to whether I replace with a stock clutch or aftermarket clutch?

    Also would you replace sensors etc also when replacing the clutch?
     
  2. Ingenere

    Ingenere F1 Veteran
    Owner Silver Subscribed

    Dec 11, 2001
    6,449
    On the Limit
    Full Name:
    Dino
    #2 Ingenere, Jun 1, 2014
    If it's apart, it probably is a good time to replace the clutch position sensor.
     
  3. DonJuan348

    DonJuan348 F1 Rookie
    Owner

    Aug 5, 2008
    4,442
    Taxing Jersey
    #3 DonJuan348, Jun 1, 2014
    Clutch Master or H&R Clutch
     
  4. English Rebel

    English Rebel Formula 3

    Aug 13, 2013
    2,158
    Piedmont Area of NC
    Full Name:
    Alan
    #4 English Rebel, Jun 1, 2014
    Definitely replace the clutch sensor, bracket and throwout bearing.
    Alan
     
  5. trainwrex

    trainwrex Formula Junior

    Sep 15, 2011
    280
    Perth, Australia
    #5 trainwrex, Jun 1, 2014
    Great that was what Was recommended to me.

    Now what about clutch type ? Is standard the way to go?
     
  6. DonJuan348

    DonJuan348 F1 Rookie
    Owner

    Aug 5, 2008
    4,442
    Taxing Jersey
    #6 DonJuan348, Jun 1, 2014
    As long as your plates are straight standard is fine . It has last this amount off time . H&R rebuild what you have just let them know what material you want .
     
  7. trainwrex

    trainwrex Formula Junior

    Sep 15, 2011
    280
    Perth, Australia
    #7 trainwrex, Jun 2, 2014
    Well launching causes great wear on the clutch so if there was something better than can handle this then it would be better.
     
  8. DonJuan348

    DonJuan348 F1 Rookie
    Owner

    Aug 5, 2008
    4,442
    Taxing Jersey
    #8 DonJuan348, Jun 2, 2014
    I'm sure H&R could give you proper recommendations . I've read on the forum that some time there's an issue using kevlar with F1 .
     

Share This Page