Confused on FI seals-please help | FerrariChat
Buy

Confused on FI seals-please help

Discussion in '308/328' started by manta147, Apr 24, 2021.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. manta147

    manta147 Karting

    Sep 7, 2006
    128
    seekonk,mass
    Full Name:
    carter petter
    #1 manta147, Apr 24, 2021
    Been away for a LONG time,good to be back. I'm replacing the injectors on my '82 308 2v. The original seals are a big black seal,part#114661 avail at Riciambi. From reading past posts everyone talks about a smaller green o-ring type seal,I think it's part#113570. My question is does the green o-ring seal replace the original black bigger original seal. I don't see the green o-ring on my original injectors?
    Also,I need to replace the plastic fuel lines on the FD. Is Verrell still in business? Left a message haven't heard back. Does anyone else make the kit for the plastic FD lines????
    Thank in advance for your help,been out of this game for 10yrs.
    Carter
     
  2. mwr4440

    mwr4440 Five Time F1 World Champ
    Rossa Subscribed

    Jun 8, 2007
    57,962
    Bavaria, The 'Other' Germany
    Full Name:
    Mark W.R.
    #2 mwr4440, Apr 25, 2021
    Last edited: Apr 25, 2021
    Carter,

    NO.

    The green o-rings DO NOT replace the large, thick, black rubber gaskets that fit inside the steel injector carriers (holders).

    The instant way to tell what gasket/o-ring is needed, is if your injector carrier Screws-In to the manifold or they are held In-Place with a C-Clip.

    Hope that makes sense.


    The black 'plastic' FD Lines are made by the German Company, Cohline.

    If for some reason Verell is unavailable, seek and ye shall find.

    Remember though, Cohline does not sell Direct to the Public.
     
  3. manta147

    manta147 Karting

    Sep 7, 2006
    128
    seekonk,mass
    Full Name:
    carter petter
    #3 manta147, Apr 25, 2021
    Thank you Mark. My injectors screw in,no c clip. So just to make sure that means no O-rings at all?
     

Share This Page