converting a Diablo 6.0 to RWD? | FerrariChat

converting a Diablo 6.0 to RWD?

Discussion in 'LamborghiniChat.com' started by h113862, May 7, 2007.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. h113862

    h113862 Formula Junior

    Joined:
    Sep 13, 2004
    Messages:
    256
    Location:
    Wellington/Sydney
    Full Name:
    Callum
    I thought I saw a thread on here about converting a 4WD diablo to RWD. My pitiful attempts at searching didn't turn up anything. Does anyone know if this is possible? I spoke to my dealer about doing such a conversion, but they weren't very keen on the idea ...
     
    h113862, May 7, 2007
    #1
  2. sosick

    sosick Formula Junior BANNED

    Joined:
    May 5, 2007
    Messages:
    268
    yes it can be done,we do it all the time if you need to know how email me at [email protected] and put your name and phone number.
     
    sosick, May 7, 2007
    #2
  3. SharperFocus

    SharperFocus Karting

    Joined:
    Mar 25, 2007
    Messages:
    225
    Just remove the driveshaft. It's pretty basic.
     
    SharperFocus, May 7, 2007
    #3
  4. ferraripete

    ferraripete F1 World Champ

    Joined:
    Nov 5, 2003
    Messages:
    11,560
    Location:
    san diego/charlotte
    what does this do to re-sale value? is it easy to convert back?
     
    ferraripete, May 7, 2007
    #4
  5. SharperFocus

    SharperFocus Karting

    Joined:
    Mar 25, 2007
    Messages:
    225
    Nothing in my eyes and yes it's just as easy to put back.
     
    SharperFocus, May 7, 2007
    #5
  6. h113862

    h113862 Formula Junior

    Joined:
    Sep 13, 2004
    Messages:
    256
    Location:
    Wellington/Sydney
    Full Name:
    Callum
    Ok, thanks, an email is on its way.

    Does the conversion reduce the Diablo's tendency to understeer?

    Also, how much weight do you think the conversion saves?

    C
     
    h113862, May 8, 2007
    #6
  7. Andrew R.

    Andrew R. Formula Junior

    Joined:
    Jun 27, 2005
    Messages:
    593
    Location:
    Michigan
    Full Name:
    Andrew
    If you take everything out... its about 100lbs.

    Most guys have just been removing the driveshaft, comes out easy and goes back in easy.

    As anyone would guess, it just feels like an SV.... it gets loose easy :)
     
    Andrew R., May 9, 2007
    #7

Share This Page