Correct Float height for 308 Carb GT4 | FerrariChat
Buy

Correct Float height for 308 Carb GT4

Discussion in '308/328' started by robertgarven, Jul 17, 2010.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. robertgarven

    robertgarven F1 Veteran
    Owner

    Feb 24, 2002
    5,322
    Ventura, California
    Full Name:
    Robert Garven
    #1 robertgarven, Jul 17, 2010
    Freinds,

    I have a long 308 Carb thread going. I cant believe I waited so long to do thsi. I am having fun and seems like I am getting the hang of this. My car has 45-46-47-48 and the WSM says 48mm, but that is for 35-36-37-38. But a trusted friend says that is too high and 50 is the
    correct height. I have 4 weber books and they say both too so thats no help. Also in the Haynes manual it shows measuring from the weld, but my pal said that is wrong measure from the inside float shoulder. Any thoughts

    Rob

    Check out my other thread I have allot going on.

    http://www.ferrarichat.com/forum/showthread.php?t=289637

    Thanks in advance
     
  2. Sledge4.2

    Sledge4.2 F1 Rookie

    Oct 19, 2007
    4,789
    Marin
    Full Name:
    Geno
    #2 Sledge4.2, Jul 17, 2010
    what do they all currently measure. I have the 72, 73, 74, 75 series, so not much help here.
     
  3. Sledge4.2

    Sledge4.2 F1 Rookie

    Oct 19, 2007
    4,789
    Marin
    Full Name:
    Geno
    #3 Sledge4.2, Jul 17, 2010
    also sent you a pm
     

Share This Page