Countach side mirrors

Are anyone else’s floppy or is it just mine lol.

im continually adjusting them and re adjusting them. Is there a way to tighten them?

 

Yes, pull back the rubber boot, set the angle to the desired level, tighten the bolt, and replace the rubber boot.

 

Thanks Joe much appreciated.

 

Image Unavailable, Please Login

Charles,

One other thing to check, the setscrew sometimes works loose and allows the mirror to wobble around. Once you loosen this enough, you can remove the entire mirror from the door. Check that the base is screwed tightly to the door. These screws can also work their way loose. And, as Joe stated you can pull the rubber boot back to adjust the angle of the mirror which sometimes works loose as well.

Mike

 

Thank you Mike, I’ll check all...much appreciated

 

Great thread, I have the same issue on the passenger side. Been working up the nerve to try pulling back the boot without ripping it.
Thank you to all!
Neil

 

Neil it’s super simple, the boot would be difficult to tear.