488 Cracked rear diffuser around screw hole

It's possible that the crack could migrate. I'd clean and sand the backside and apply and liberal coat of epoxy. Maxim is a high strength, quality automotive grade epoxy which I have used many times in the past. Helpful hint, it begins to set-up within a minute or two so apply the product accordingly. Image Unavailable, Please Login

 

It will probably get worse. Mine did the same and eventually chipped off when some Mongoloid moron decided to run his finger nail over it.

 

You’ll be ok, mongo. Go to the manicurist and have them repainted….. oh




Sent from my iPhone using FerrariChat

 

Thanks. I'm 48 today. Probably gonna do some sushi and yard darts.

 

Well then happy annual celebration of a day you had nothing to do with. Go get your mother a present. She did all the work and you just laid there and cried… like a baby.


Sent from my iPhone using FerrariChat

 

I assume that the diffuser is made out of fiberglass material like the 458. If so, one of the things you can do is remove the diffuser and use bondo resin and cloth on the back of the diffuser to add some structural strength. I have done this with my under tray which had some places cracked from improper removal. The bondo resin and glass cloth is very strong and has a working time of about 15 minutes.

 

Happy Birthday...sorry you can't roll your grill out of the garage though... ;-)

 

That's just wrong lol

 

You are a man with extensive attention to detail! I have a few hairline cracks in mine. I figure I’ll get more and replace it when I sell it.


Sent from my iPhone using FerrariChat

 

That would freak me out and upset me to the point of debating selling the car since I prob couldn't afford to buy a new diffuser.

 

You made a thread about that? Lol


There are starving children in Africa


I'm. Drinking

 

Happy birthday!


Sent from my iPhone using FerrariChat