Crank Position Sensor: Bank 7-12 | FerrariChat
Buy

Crank Position Sensor: Bank 7-12

Discussion in 'Boxers/TR/M' started by MITengineer, Oct 9, 2022.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. MITengineer

    MITengineer Formula Junior

    Feb 18, 2004
    374
    Montana
    #1 MITengineer, Oct 9, 2022
  2. Rifledriver

    Rifledriver Three Time F1 World Champ

    Apr 29, 2004
    37,110
    Cowboy Capitol of the World
    Full Name:
    Brian Crall
    #2 Rifledriver, Oct 9, 2022
    #19 is the upper one and according to your diagram it is connected to 7-12.
    That agrees with the picture in the parts manual. However the legend in the parts book says the opposite.

    The shop manual system picture shows 19 as 1/6 but a close up of the sensors shows the upper to be 7-12. Rather typical Ferrari.

    Have an ohm meter? Or you can unplug one and see which bank is dead.
     
    MITengineer likes this.
  3. MITengineer

    MITengineer Formula Junior

    Feb 18, 2004
    374
    Montana
    #3 MITengineer, Oct 9, 2022
    71veedub likes this.
  4. MITengineer

    MITengineer Formula Junior

    Feb 18, 2004
    374
    Montana
    #4 MITengineer, Oct 23, 2022
    To remedy this - the upper sensor is connected to Bank 7-12
     
    71veedub likes this.

Share This Page