Cruscotto Gauge Cluster Trade!! | FerrariChat

Cruscotto Gauge Cluster Trade!!

Discussion in '456/550/575' started by louie23, May 30, 2012.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. louie23

    louie23 Karting

    Jan 11, 2012
    81
    Japan
    Full Name:
    Louie
    As most of us know, there are two buttons on the center console that control features on the Gauge cluster. The Left Button Controls the Multi-Fuctions Outside temp and Brightness levels and the right has to do with the Odometer trip.
    Anyway, long story short. This cluster on my 575M is displaying an F instead of a C for the outside temp. I am in Japan, so the C is preferred.
    What I am hoping to accomplish with this post is find anyone with the opposite dilemma. (a C instead of an F) who may be willing to trade. I will cover shipping both ways, and kick down $100 as a Thank You!!
     
  2. louie23

    louie23 Karting

    Jan 11, 2012
    81
    Japan
    Full Name:
    Louie
    Issue has been resolved!! Had to replace the cluster. Hopefully we all learn from this. The Processor have been specially coded for the a specific region. I am not talking about the Parameter settings that can be modified with SD2/SD3 or any of those tools. Not even the EPROM can fix this subtle but annoying problem. If you are in the Market for a new Gauge Cluster, and every detail matters. Be sure to ask if the Outside temperature Tag letter is a C or F. Other wise you'll be showing a Fahrenheit temperature with a Celsius Tag. And Only a replacement cluster with the correct software will fix the problem.
     

Share This Page