News

Dash warning lights & the correct wire code?

Discussion in 'Technical Q&A' started by Michael B, Jul 29, 2004.

  1. Michael B

    Michael B F1 Rookie
    Silver Subscribed Owner

    Apr 28, 2004
    3,649
    US of A
    Full Name:
    Michael
    Hey guys,

    Noted that a few dash indicator lights were not turning on with the key in a 1989 Mondial t.

    After removing the gauges I found several bulbs had fallen out of the dash pod sockets (such as the Brake light, and "slow down" lights). All of the bulbs seem to work, but I have a series of them out, and I am not sure what "slot" to put them back into.

    I was able to figure out the rear defrost bulb, parking lights, fog lights but I am at a loss for about 7 or 8 others.

    Any ideas? I just want to slot these bulbs back in the correct holes. Any body out there have a wire diagram that can give me the wire color codes per slot? I think I have 12 slots left to right, and have only figured out 3 or 4!

    Any help is appreciated.
     
  2. To remove this ad click here.

  3. Michael B

    Michael B F1 Rookie
    Silver Subscribed Owner

    Apr 28, 2004
    3,649
    US of A
    Full Name:
    Michael
    Here is what I have so far:

    From left to right dash bulb slots:

    Seat belt Left = ?
    Suspension = ?
    Parking lights = Purple & Pink wires
    Brake = ?
    Check eng 5/8 = ?
    Slow down 5/8 = ?
    Slow down 1/4 = ?
    Check eng 1/4 = ?
    Rear fog light = ?
    Front fog light = Black & Pink wires
    Rear defrost = Black & Blue wires
    Seat belt Right = ?

    Most of the others have 3 wires!
     

Share This Page