Daytona Boot/Bonnet Release Pull Latch Housings | FerrariChat

Daytona Boot/Bonnet Release Pull Latch Housings

Discussion in '365 GT4 2+2/400/412' started by m1tch_uk, Aug 17, 2007.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. m1tch_uk

    m1tch_uk Karting

    Aug 16, 2007
    57
    United Kingdom
    Full Name:
    Alex Mitchell
    #1 m1tch_uk, Aug 17, 2007
    Last edited by a moderator: Sep 7, 2017
    Hello, I work for a Ferrari Restoration specialist in the United Kingdom, and in the case of both of the Daytona's we currently have in at the moment the aforementioned parts are broken in both cars (no doubt due to the age of the plastic). Because of this we are having a number of these produced in a higher quality plastic, since Maranellos no longer stock or sell these, and other sources are proving to be poor value.

    What I wish to establish is whether this definately is a common problem with all Daytona's, and where (if applicable) people have sourced replacements.

    Here is a picture of the part (also fitted to the 206 gt and the Boxer) just for clarification of what is being produced:
    (See Below Attachment)
    Note it is only the plastic housing for the pull latch that is being produced.

    If anyone is interested in more information about these, please do not hesitate to ask. Better pictures will also be available soon!

    Regards
    Alex
    Image Unavailable, Please Login
     
  2. KraigG

    KraigG Formula 3

    May 25, 2006
    1,501
    Willow Springs
    Full Name:
    Kraig
    You might also want to post this question in the section that covers Daytonas.
     

Share This Page