Daytona glove box light | FerrariChat

Daytona glove box light

Discussion in 'Vintage (thru 365 GTC4)' started by pauls, Apr 25, 2004.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. pauls

    pauls Formula Junior

    Apr 25, 2004
    524
    I have the dash out and would like to remove the glove box light. There are three spring loaded prongs that hold the light intact to the backside of the glove box. To remove the light you are supposed to conpress the three prongs to slide the entire unit through the hole in the glove box. When I do this the hole seems too small as each of the three prongs has a ridge in it that make the unit too large in diameter to slide it through the glove box hole into the glove box. I know it must come out as it was placed there by a mortal but I am perplexed as to how to do this. Any help would be appreciated.
     
  2. 365boy

    365boy Formula Junior

    Nov 5, 2003
    357
    Brighton, England
    Full Name:
    John Leaman
    Do you just want to stop the light coming on...?

    If so, just unscrew the plastic cover a bit (at least that worked for me).

    John
     

Share This Page