Hey Guys, Happy Holidays. I have my 550 in the shop doing a stereo upgrade & decided to redo my worn factory seats to Daytona style seats. My local upholster is very talented and detail oriented & I know he will do a great job. My only concern is he doesn't have a 550 Daytona seat pattern. He just did a 430 but I noticed the seat pattern is different than a 550. Anyway to get a pattern for a 550? Or possible dimensions of seat inserts. I noticed 550 have 8 Daytona strips on the bottom section & 7 on the top portion. Would be great to know exact specs of size of strips. TIA
I would really appreciate if anyone has just the measurement of the Daytona seats, or would be kind enough to measure the distance & the amount of Daytona strips per upper & lower seat halve. Thanks a lot!!!!
I just measured mine - 8 inserts in the seat, 7 in the back. Each insert section is 3/4 of an inch wide (front of seat to back) and 5 7/8 inches across (side to side). The front edge of the very first insert is about 4 3/4 inches from the front edge of the seat. The sections between each insert are about 1 1/2 inches wide. Hope that at least gets you started- Bill
Email [email protected] for any information needed regarding this pattern. We charge $5,000 a pair with a 5-8 day turnaround.
That's a great price for perfection!! Unfortunately my upholster guy started taking seats apart if not I would have shipped them down. Wish u guys had a satellite shop here I'm LA