Detailed instructions for straight pipe installation | FerrariChat
Buy

Detailed instructions for straight pipe installation

Discussion in 'Technical Q&A' started by BigSky355, May 24, 2005.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. BigSky355

    BigSky355 Karting

    Nov 8, 2004
    196
    Montana
    Full Name:
    Chris
    #1 BigSky355, May 24, 2005
    Would anyone be able to give me a step by step checklist on how to change out cats for straight pipes on a 95 355 (or point me to the appropriate thread/ resource) . I am going to look into having someone local do the job if it is not too involved. Options for service are a bit limited and the nearest guy doesn't do exhaust work.
    Thanks in advance,
    Chris
     
  2. 4retr

    4retr Formula Junior

    Nov 21, 2004
    384
    Southern California
    Full Name:
    David B.
    #2 4retr, May 24, 2005
    Hello:

    When I bought my 95 F355 Spider the dealer sold it with hollow cats (Still trying to ge reimbursed for my replacement cats). My mechanic said the previous owner or dealer removed the inner element from the factory cats so that the were basically test pipes. The car is less loud but I did notice that the engine bay was significantly hotter and the I did not feel some restriction after replacing the cats.
     
  3. Llenroc

    Llenroc F1 Veteran
    Rossa Subscribed

    Jun 9, 2004
    5,536
    Colorado
    Full Name:
    Vern
    #3 Llenroc, May 24, 2005
    you have a PM
     
  4. parkerfe

    parkerfe F1 World Champ

    Sep 4, 2001
    12,887
    Cumming, Georgia
    Full Name:
    Franklin E. Parker
    #4 parkerfe, May 25, 2005
    Try calling the EPA or your state's emission enforcement department. They should be able to help you out!
     
  5. evansp60

    evansp60 Formula Junior

    Nov 2, 2003
    384
    Ottawa, Ont. CANADA
    #5 evansp60, May 25, 2005

Share This Page