Detailing the Engine Bay | FerrariChat
Buy

Detailing the Engine Bay

Discussion in '360/430' started by bobby355, Feb 5, 2011.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. bobby355

    bobby355 Karting

    May 21, 2009
    244
    #1 bobby355, Feb 5, 2011
    Gents -

    Anyone have any suggestions on how to clean the 360 engine bay?

    It's looking a little dirty after lots of driving.

    Thanks all.
     
  2. Ingenere

    Ingenere F1 Veteran
    Owner Silver Subscribed

    Dec 11, 2001
    6,449
    On the Limit
    Full Name:
    Dino
    #2 Ingenere, Feb 5, 2011
    I use simple green on any greasy bits, and Speed Shine from Griot's Garage on everything else.
     
  3. fc2

    fc2 F1 Veteran
    Owner

    Nov 2, 2006
    5,263
    Silicon Valley Ca.
    Full Name:
    Frank C.
    #3 fc2, Feb 5, 2011
    Simple Green is your friend. Works great on my cars.
     
  4. PbPedis

    PbPedis Formula Junior

    May 6, 2007
    710
    Ontario, Canada
    Full Name:
    Dennis
    #4 PbPedis, Feb 5, 2011
    I also use Simple Green and a toothbrush but there are still some spots I can't seem to get clean.
     
  5. djantlive

    djantlive Formula 3

    Jun 30, 2005
    1,015
    #5 djantlive, Feb 5, 2011
    becareful not to use simple green on alum parts. it's said that porous alum will absorb simple green and cause weakening of the part.
     
  6. ttdang123

    ttdang123 Formula Junior

    Nov 28, 2009
    706
    North San Diego CA
    Full Name:
    Tung
    #6 ttdang123, Feb 6, 2011

Share This Page