Device to pull codes on Euro 355 w/ 2.7 mot | FerrariChat
Buy

Device to pull codes on Euro 355 w/ 2.7 mot

Discussion in '348/355' started by thibaut, Jul 24, 2016.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. thibaut

    thibaut Formula Junior

    Feb 28, 2004
    530
    London, UK
    Full Name:
    Thibaut A.
    #1 thibaut, Jul 24, 2016
    Hi everybody,

    I am looking for the device to extract the codes from a euro spec early 355. Being a euro 2.7 it doesn't have the switch as in US versions.
    Is anybody anywhere selling the switch ?
    Failing that, does anybody have the specifications of the various bits so I could try a DIY job at making one ?

    many thanks
     
  2. Dave rocks

    Dave rocks F1 World Champ
    BANNED

    Nov 23, 2012
    16,047
    Orchard Park, NY
    Full Name:
    Dave Lelonek
    #2 Dave rocks, Jul 24, 2016
    You are saying the ECU's don't have buttons to press and pull codes via a flashing MIL light?
     
  3. thibaut

    thibaut Formula Junior

    Feb 28, 2004
    530
    London, UK
    Full Name:
    Thibaut A.
    #3 thibaut, Jul 24, 2016
    yes exactly. The buttons are only on the US spec cars.
    I understand that all is needed (except the buttons) is already there tough.
    just need to add the buttons
     
  4. Dave rocks

    Dave rocks F1 World Champ
    BANNED

    Nov 23, 2012
    16,047
    Orchard Park, NY
    Full Name:
    Dave Lelonek
    #4 Dave rocks, Jul 24, 2016
    Last edited by a moderator: Sep 7, 2017
    ShineKen likes this.
  5. Dave rocks

    Dave rocks F1 World Champ
    BANNED

    Nov 23, 2012
    16,047
    Orchard Park, NY
    Full Name:
    Dave Lelonek
    #5 Dave rocks, Jul 24, 2016
    Last edited by a moderator: Sep 7, 2017
  6. ernie

    ernie Two Time F1 World Champ
    Lifetime Rossa Owner

    Nov 19, 2001
    22,614
    The Brickyard
    Full Name:
    The Bad Guy
    #6 ernie, Jul 24, 2016
  7. Dave rocks

    Dave rocks F1 World Champ
    BANNED

    Nov 23, 2012
    16,047
    Orchard Park, NY
    Full Name:
    Dave Lelonek
    #7 Dave rocks, Jul 24, 2016
  8. fastradio

    fastradio F1 Rookie
    BANNED Professional Ferrari Technician

    Apr 26, 2006
    3,664
    New England
    Full Name:
    David Feinberg
    #8 fastradio, Jul 24, 2016
    All markets, all ECUs have the ALDL connection. That's where the SD tool plugs in. On the 2.7 355 and certain other models, a simple push button put the ECU in diagnostic mode. As Europe did not mandate OBD, there was no need to include the button.
     
  9. Dave rocks

    Dave rocks F1 World Champ
    BANNED

    Nov 23, 2012
    16,047
    Orchard Park, NY
    Full Name:
    Dave Lelonek
    #9 Dave rocks, Jul 24, 2016
    Good to know - thanks.
     
  10. fastradio

    fastradio F1 Rookie
    BANNED Professional Ferrari Technician

    Apr 26, 2006
    3,664
    New England
    Full Name:
    David Feinberg
    #10 fastradio, Jul 24, 2016
    I have a new ALDL harness with push button, if you really want one. Frankly, a simple momentary contact button and some wire will be far simpler for you.
     
  11. thibaut

    thibaut Formula Junior

    Feb 28, 2004
    530
    London, UK
    Full Name:
    Thibaut A.
    #11 thibaut, Jul 24, 2016
    Ernie, many thanks for the link to the other post.
    I am not that good with search function.
    I will order the various bits and make one.
     
  12. ClydeM

    ClydeM F1 World Champ
    Owner Rossa Subscribed

    Nov 4, 2003
    11,882
    Wayne, NJ
    Full Name:
    Clyde E. McMurdy
    #12 ClydeM, Jul 24, 2016
    from my348.com
     

Share This Page